草庐IT

java - NetworkInterface.getNetworkInterfaces() 没有列出所有接口(interface)

coder 2023-08-28 原文

我的机器上有三个接口(interface)(eth0,Loopback,wlan0)，我想使用 Java-API 来获取 mac 地址。

  • 我使用这个代码。

    Enumeration<NetworkInterface> nets = NetworkInterface.getNetworkInterfaces();
    for (NetworkInterface netint : Collections.list(nets))
        displayInterfaceInformation(netint);
}

static void displayInterfaceInformation(NetworkInterface netint) 
  throws SocketException 
{
    System.out.println("Display name: " 
       + netint.getDisplayName());
    System.out.println("Hardware address: " 
       + Arrays.toString(netint.getHardwareAddress()));
}

  • 但是那段代码打印了wlan0,loopback，但是错过了eth0。

  • 我的操作系统 Ubuntu，任何帮助。

更新

  • o/p (strace -f java Networks 2>&1| grep ioctl).. blank(empty).

  • java -version

Java 版本“1.7.0_21” Java(TM) SE 运行时环境(build 1.7.0_21-b11) Java HotSpot(TM) 64 位服务器 VM(构建 23.21-b01，混合模式)

  • strace ifconfig 2>&1 | grep ioctl

ioctl(4, SIOCGIFCONF, {80, {{"lo", {AF_INET, inet_addr("127.0.0.1")}}, {"wlan0", {AF_INET, inet_addr("192.168.1.101")}}}}) = 0
ioctl(5, SIOCGIFFLAGS, {ifr_name="eth0", ifr_flags=IFF_UP|IFF_BROADCAST|IFF_MULTICAST}) = 0
ioctl(5, SIOCGIFHWADDR, {ifr_name="eth0", ifr_hwaddr=----------------}) = 0
ioctl(5, SIOCGIFMETRIC, {ifr_name="eth0", ifr_metric=0}) = 0
ioctl(5, SIOCGIFMTU, {ifr_name="eth0", ifr_mtu=1500}) = 0
ioctl(5, SIOCGIFMAP, {ifr_name="eth0", ifr_map={mem_start=0, mem_end=0, base_addr=0, irq=0, dma=0, port=0}}) = 0
ioctl(5, SIOCGIFMAP, {ifr_name="eth0", ifr_map={mem_start=0, mem_end=0, base_addr=0, irq=0, dma=0, port=0}}) = 0
ioctl(5, SIOCGIFTXQLEN, {ifr_name="eth0", ifr_qlen=1000}) = 0
ioctl(4, SIOCGIFADDR, {ifr_name="eth0", ???}) = -1 EADDRNOTAVAIL(无法分配请求的地址)
ioctl(5, SIOCGIFFLAGS, {ifr_name="lo", ifr_flags=IFF_UP|IFF_LOOPBACK|IFF_RUNNING}) = 0
ioctl(5, SIOCGIFHWADDR, {ifr_name="lo", ifr_hwaddr=00:00:00:00:00:00}) = 0
ioctl(5, SIOCGIFMETRIC, {ifr_name="lo", ifr_metric=0}) = 0
ioctl(5, SIOCGIFMTU, {ifr_name="lo", ifr_mtu=16436}) = 0
ioctl(5, SIOCGIFMAP, {ifr_name="lo", ifr_map={mem_start=0, mem_end=0, base_addr=0, irq=0, dma=0, port=0}}) = 0
ioctl(5, SIOCGIFMAP, {ifr_name="lo", ifr_map={mem_start=0, mem_end=0, base_addr=0, irq=0, dma=0, port=0}}) = 0
ioctl(5, SIOCGIFTXQLEN, {ifr_name="lo", ifr_qlen=0}) = 0
ioctl(4, SIOCGIFADDR, {ifr_name="lo", ifr_addr={AF_INET, inet_addr("127.0.0.1")}}) = 0
ioctl(4, SIOCGIFDSTADDR, {ifr_name="lo", ifr_dstaddr={AF_INET, inet_addr("127.0.0.1")}}) = 0
ioctl(4, SIOCGIFBRDADDR, {ifr_name="lo", ifr_broadaddr={AF_INET, inet_addr("0.0.0.0")}}) = 0
ioctl(4, SIOCGIFNETMASK, {ifr_name="lo", ifr_netmask={AF_INET, inet_addr("255.0.0.0")}}) = 0
ioctl(5, SIOCGIFFLAGS, {ifr_name="wlan0", ifr_flags=IFF_UP|IFF_BROADCAST|IFF_RUNNING|IFF_MULTICAST}) = 0
ioctl(5, SIOCGIFHWADDR, {ifr_name="wlan0", ifr_hwaddr=----------------}) = 0
ioctl(5, SIOCGIFMETRIC, {ifr_name="wlan0", ifr_metric=0}) = 0
ioctl(5, SIOCGIFMTU, {ifr_name="wlan0", ifr_mtu=1500}) = 0
ioctl(5, SIOCGIFMAP, {ifr_name="wlan0", ifr_map={mem_start=0, mem_end=0, base_addr=0, irq=0, dma=0, port=0}}) = 0
ioctl(5, SIOCGIFMAP, {ifr_name="wlan0", ifr_map={mem_start=0, mem_end=0, base_addr=0, irq=0, dma=0, port=0}}) = 0
ioctl(5, SIOCGIFTXQLEN, {ifr_name="wlan0", ifr_qlen=1000}) = 0
ioctl(4, SIOCGIFADDR, {ifr_name="wlan0", ifr_addr={AF_INET, inet_addr("192.168.1.101")}}) = 0
ioctl(4, SIOCGIFDSTADDR, {ifr_name="wlan0", ifr_dstaddr={AF_INET, inet_addr("192.168.1.101")}}) = 0
ioctl(4, SIOCGIFBRDADDR, {ifr_name="wlan0", ifr_broadaddr={AF_INET, inet_addr("192.168.1.255")}}) = 0
ioctl(4, SIOCGIFNETMASK, {ifr_name="wlan0", ifr_netmask={AF_INET, inet_addr("255.255.255.0")}}) = 0

ifconfig

$ ifconfig
eth0      Link encap:Ethernet  HWaddr -------------  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1695 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1695 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:129949 (129.9 KB)  TX bytes:129949 (129.9 KB)

wlan0     Link encap:Ethernet  HWaddr -------------------  
          inet addr:192.168.1.101  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::-------------- Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8396 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5524 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3959941 (3.9 MB)  TX bytes:1513934 (1.5 MB)

最佳答案

显然，我一开始就错了:尽管 ifconfig 和 Java API 都在使用 相同的 ioctl() 系统调用，它们的行为不同。

首先，SIOCGIFCONF ioctl() 记录如下(参见 http://linux.die.net/man/7/netdevice ):

SIOCGIFCONF
    Return a list of interface (transport layer) addresses.
    ...
    The kernel fills the ifreqs with all current L3 interface 
    addresses that are running.

So, the SIOCGIFCONF ioctl() which is used by both ifconfig and the JAVA API only returns the running interfaces. This can also be seen in the strace ifconfig ... output from the question - the very first ioctl only returns lo and wlan0, but not eth0.

Then, where does ifconfig get the eth0 from at all? Checking the ifconfig source code (from the net-tools package on Debian/Ubuntu), we see that ifconfig is not using the result from the ioctl() as the basis for the network device enumeration, but first of all reads the /proc filesystem to determine all network interfaces. Then, it uses the ioctl() syscalls to determine further information about each interface.

Unfortunately, the java.net.NetworkInterface.getByName() method does not even return a network interface object for an unconfigured interface if we explicitly pass the name, like eth0.

Essentially, there remain three different approaches to get the hardware addresses of all devices on Linux:

  • Call ifconfig and parse the output (should be last resort)
  • Implement a JNI library to do the same what ifconfig does (requires an architecture dependent shared library)
  • Read the data directly from the /proc and the /sys filesystems.

All of these approaches are system dependant and not portable. The benefit of the third approach is that it can be implemented in pure Java. The following is a sample implementation of the third approach which worked well in my environment:

static void printHardwareAddresses() throws SocketException {
    if (System.getProperty("os.name").equals("Linux")) {

        // Read all available device names
        List<String> devices = new ArrayList<>();
        Pattern pattern = Pattern.compile("^ *(.*):");
        try (FileReader reader = new FileReader("/proc/net/dev")) {
            BufferedReader in = new BufferedReader(reader);
            String line = null;
            while( (line = in.readLine()) != null) {
                Matcher m = pattern.matcher(line);
                if (m.find()) {
                    devices.add(m.group(1));
                }
            }
        } catch (IOException e) {
            e.printStackTrace();
        }

        // read the hardware address for each device
        for (String device : devices) {
            try (FileReader reader = new FileReader("/sys/class/net/" + device + "/address")) {
                BufferedReader in = new BufferedReader(reader);
                String addr = in.readLine();

                System.out.println(String.format("%5s: %s", device, addr));
            } catch (IOException e) {
                e.printStackTrace();
            }
        }

    } else {
        // use standard API for Windows & Others (need to test on each platform, though!!)
        ...
    }
}

关于java - NetworkInterface.getNetworkInterfaces() 没有列出所有接口(interface)，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/17698971/

getNetworkInterfacesNetworkInterfacecodeifrioctljava

有关java - NetworkInterface.getNetworkInterfaces() 没有列出所有接口(interface)的更多相关文章

  1. ruby - 如何以所有可能的方式将字符串拆分为长度最多为 3 的连续子字符串？ - 2

    我试图获取一个长度在1到10之间的字符串，并输出将字符串分解为大小为1、2或3的连续子字符串的所有可能方式。例如:输入:123456将整数分割成单个字符，然后继续查找组合。该代码将返回以下所有数组。[1,2,3,4,5,6][12,3,4,5,6][1,23,4,5,6][1,2,34,5,6][1,2,3,45,6][1,2,3,4,56][12,34,5,6][12,3,45,6][12,3,4,56][1,23,45,6][1,2,34,56][1,23,4,56][12,34,56][123,4,5,6][1,234,5,6][1,2,345,6][1,2,3,456][123

  2. ruby - 难道Lua没有和Ruby的method_missing相媲美的东西吗？ - 2

    我好像记得Lua有类似Ruby的method_missing的东西。还是我记错了？ 最佳答案 表的metatable的__index和__newindex可以用于与Ruby的method_missing相同的效果。 关于ruby-难道Lua没有和Ruby的method_missing相媲美的东西吗？，我们在StackOverflow上找到一个类似的问题： https://stackoverflow.com/questions/7732154/

  3. ruby-on-rails - rails 目前在重启后没有安装 - 2

    我有一个奇怪的问题:我在rvm上安装了ruby​​onrails。一切正常，我可以创建项目。但是在我输入“railsnew”时重新启动后，我有“程序'rails'当前未安装。”。SystemUbuntu12.04ruby-v"1.9.3p194"gemlistactionmailer(3.2.5)actionpack(3.2.5)activemodel(3.2.5)activerecord(3.2.5)activeresource(3.2.5)activesupport(3.2.5)arel(3.0.2)builder(3.0.0)bundler(1.1.4)coffee-rails(

  4. ruby - 在没有 sass 引擎的情况下使用 sass 颜色函数 - 2

    我想在一个没有Sass引擎的类中使用Sass颜色函数。我已经在项目中使用了sassgem，所以我认为搭载会像以下一样简单:classRectangleincludeSass::Script::FunctionsdefcolorSass::Script::Color.new([0x82,0x39,0x06])enddefrender#hamlengineexecutedwithcontextofself#sothatwithintemlateicouldcall#%stop{offset:'0%',stop:{color:lighten(color)}}endend更新:参见上面的#re

  5. java - 等价于 Java 中的 Ruby Hash - 2

    我真的很习惯使用Ruby编写以下代码:my_hash={}my_hash['test']=1Java中对应的数据结构是什么？ 最佳答案 HashMapmap=newHashMap();map.put("test",1);我假设？ 关于java-等价于Java中的RubyHash，我们在StackOverflow上找到一个类似的问题： https://stackoverflow.com/questions/22737685/

  6. ruby-on-rails - 跳过状态机方法的所有验证 - 2

    当我的预订模型通过rake任务在状态机上转换时，我试图找出如何跳过对ActiveRecord对象的特定实例的验证。我想在reservation.close时跳过所有验证!叫做。希望调用reservation.close!(:validate=>false)之类的东西。仅供引用，我们正在使用https://github.com/pluginaweek/state_machine用于状态机。这是我的预订模型的示例。classReservation["requested","negotiating","approved"])}state_machine:initial=>'requested

  7. ruby - Nokogiri 剥离所有属性 - 2

    我有这个html标记:我想得到这个:我如何使用Nokogiri做到这一点？ 最佳答案 require'nokogiri'doc=Nokogiri::HTML('')您可以通过xpath删除所有属性:doc.xpath('//@*').remove或者，如果您需要做一些更复杂的事情，有时使用以下方法遍历所有元素会更容易:doc.traversedo|node|node.keys.eachdo|attribute|node.deleteattributeendend 关于ruby-Nokog

  8. ruby - 获取模块中定义的所有常量的值 - 2

    我想获取模块中定义的所有常量的值:moduleLettersA='apple'.freezeB='boy'.freezeendconstants给了我常量的名字:Letters.constants(false)#=>[:A,:B]如何获取它们的值的数组，即["apple","boy"]？ 最佳答案 为了做到这一点，请使用mapLetters.constants(false).map&Letters.method(:const_get)这将返回["a","b"]第二种方式:Letters.constants(false).map{|c

  9. java - 从 JRuby 调用 Java 类的问题 - 2

    我正在尝试使用boilerpipe来自JRuby。我看过guide从JRuby调用Java，并成功地将它与另一个Java包一起使用，但无法弄清楚为什么同样的东西不能用于boilerpipe。我正在尝试基本上从JRuby中执行与此Java等效的操作:URLurl=newURL("http://www.example.com/some-location/index.html");Stringtext=ArticleExtractor.INSTANCE.getText(url);在JRuby中试过这个:require'java'url=java.net.URL.new("http://www

  10. 没有类的 Ruby 方法？ - 2

    大家好!我想知道Ruby中未使用语法ClassName.method_name调用的方法是如何工作的。我头脑中的一些是puts、print、gets、chomp。可以在不使用点运算符的情况下调用这些方法。为什么是这样？他们来自哪里？我怎样才能看到这些方法的完整列表？ 最佳答案 Kernel中的所有方法都可用于Object类的所有对象或从Object派生的任何类。您可以使用Kernel.instance_methods列出它们。 关于没有类的Ruby方法？，我们在StackOverflow

随机推荐