我是一名新手/初级程序员，在使用一些简单的客户端/服务器 C 代码时遇到问题。我的最终目标是将方位角/仰角数据的“流”从服务器发送到客户端，然后在接收到该数据时对其进行转换(这只是一个除法，但我真的不知道该怎么做任一)转换为平移/俯仰装置的位置数据，然后通过串口将转换后的数据输出到平移/俯仰云台。 (稍后我可能会回来询问...)

现在我只是想弄清楚如何发送和接收数据。我从这个网站上抓取了代码。 http://www.tenouk.com/Winsock/Winsock2example3.html .我必须四处移动一些声明才能编译代码。

我在客户端电脑上使用 Windows 7 和 VS2010 专业版。客户端和服务器之间没有路由器(它们通过以太网直接连接)。

使用调试器，我发现我在这一点上被挂断了。

clientService.sin_family = AF_INET;
clientService.sin_addr.s_addr = inet_addr("12.266.66.255");
clientService.sin_port = htons(55555);

if (connect(m_socket, (SOCKADDR*)&clientService, sizeof(clientService)) == SOCKET_ERROR)
{
    printf("Client: connect() - Failed to connect.\n");
    WSACleanup();
    return 0;
}

else
{
   printf("Client: connect() is OK.\n");
   printf("Client: Can start sending and receiving data...\n");
}

我总是收到“连接失败”的消息，我不确定为什么。我使用的是主机的正确 IP 地址(我在放在这里之前更改了它)。

如果这是一个不好的例子，我愿意用另一个例子重新开始。我已经尝试了几个在网上常见的“回声”示例，但我遇到了类似的问题。如果有帮助，我也可以提供有关我的总体计划目标的更多信息。其余的客户端代码如下。我正在使用来自同一链接的服务器代码(声明四处移动)。谢谢。

int main()
{

int m_socket;

struct sockaddr_in clientService;

int bytesSent;

int bytesRecv = SOCKET_ERROR;
// Be careful with the array bound, provide some checking mechanism...
char sendbuf[200] = "This is a test string from client";
char recvbuf[200] = "";
// Initialize Winsock.

WSADATA wsaData;

int iResult = WSAStartup(MAKEWORD(2,2), &wsaData);
if (iResult != NO_ERROR)
          printf("Client: Error at WSAStartup().\n");
else
          printf("Client: WSAStartup() is OK.\n");

// Create a socket
m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
if (m_socket == INVALID_SOCKET)
{
    printf("Client: socket() - Error at socket(): %ld\n", WSAGetLastError());
    WSACleanup();
    return 0;
}

else
   printf("Client: socket() is OK.\n");

// Connect to a server.
// Just test using the localhost, you can try other IP address
clientService.sin_family = AF_INET;
clientService.sin_addr.s_addr = inet_addr("12.233.21.254");
clientService.sin_port = htons(55555);

if (connect(m_socket, (SOCKADDR*)&clientService, sizeof(clientService)) == SOCKET_ERROR)
{
    printf("Client: connect() - Failed to connect.\n");
    WSACleanup();
    return 0;
}

else
{
   printf("Client: connect() is OK.\n");
   printf("Client: Can start sending and receiving data...\n");
}

// Send and receive data.
   // Receives some test string to server...

   while(bytesRecv == SOCKET_ERROR)
   {
       bytesRecv = recv(m_socket, recvbuf, 200, 0);

    if (bytesRecv == 0 || bytesRecv == WSAECONNRESET)
    {
         printf("Client: Connection Closed.\n");
        break;
    }

    if (bytesRecv < 0)
        return 0;

   else
   {
          printf("Client: recv() is OK.\n");
          printf("Client: Received data is: \"%s\"\n", recvbuf);
          printf("Client: Bytes received is: %ld.\n", bytesRecv);

   }

}

   // Sends some test data to server...
   bytesSent = send(m_socket, sendbuf, strlen(sendbuf), 0);

   if(bytesSent == SOCKET_ERROR)
          printf("Client: send() error %ld.\n", WSAGetLastError());

   else
   {
          printf("Client: send() is OK - Bytes sent: %ld\n", bytesSent);
          printf("Client: The test string sent: \"%s\"\n", sendbuf);
   }

WSACleanup();

return 0;

最佳答案

您的原始代码(显然是在我更改了 IP 和端口之后)连接到我的网络服务器时很好，但我确实对其进行了一些调整(如下)。

虽然可能有点多，CSocketServer包含大量优秀的 WinSock 代码，这些代码已经过尝试并被证明是正确的。

无论如何，这段代码连接到我的本地网络服务器，发送了一个基​​本请求并收到了响应。

int WSATest()
{
    // Initialize Winsock.
    WSADATA wsaData;
    if (WSAStartup(MAKEWORD(2,2), &wsaData) != NO_ERROR)
    {
        printf("Client: Error at WSAStartup().\n");
        return 0;
    }

    // Create a socket
    SOCKET m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
    if (m_socket == INVALID_SOCKET)
    {
        printf("Client: socket() - Error at socket(): %ld\n", WSAGetLastError());
        WSACleanup();
        return 0;
    }
    else {
        printf("Client: socket() is OK.\n");
    }

    struct sockaddr_in clientService;
    clientService.sin_family = AF_INET;
    clientService.sin_addr.s_addr = inet_addr("127.0.0.1");
    clientService.sin_port = htons(9990);

    //Connect to the remote peer:
    if (connect(m_socket, (SOCKADDR*)&clientService, sizeof(clientService)) == SOCKET_ERROR)
    {
        printf("Client: connect() - Failed to connect.\n");
        WSACleanup();
        return 0;
    }
    else
    {
        printf("Client: connect() is OK.\n");
        printf("Client: Can start sending and receiving data...\n");
    }

    //Very, very basic HTTP request.
    int iSendResult = send(m_socket, "GET / \n\n", 8, 0);
    if(iSendResult == SOCKET_ERROR)
    {
        printf("Failed to send data, error %d.\n", WSAGetLastError());
        return 0;
    }

    while(true)
    {
        char sRecvBuffer[200];
        int iRecvResult = recv(m_socket, sRecvBuffer, sizeof(sRecvBuffer) - 1, 0);

        if(iRecvResult <= SOCKET_ERROR)
        {
            printf("Failed to receive data, error %d.\n", WSAGetLastError());
            break;
        }
        else if(iRecvResult == 0)
        {
            //Graceful disconnect.
            break;
        }
        else {
            //Be sure to terminate the buffer.
            sRecvBuffer[iRecvResult] = '\0';
        }

        printf("Received: [%s] for [%d] bytes.\n", sRecvBuffer, iRecvResult);
    }

    WSACleanup();

    return 0;
}

int main()
{
    WSATest();
    system("Pause");
}

关于客户端连接失败，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/6431314/