草庐IT

ios - 需要帮助从 iOS 设备上传多个大图像

coder 2023-09-29 原文

我使用 alasset 库成功地获取了我的 iphone 图片库中的所有图片 url 并存储在一个数组中。现在我正在尝试上传到服务器,这是我的代码:

我尝试了两种方法,但都在迭代大约 10 张图像后崩溃,没有任何崩溃日志。图片不上传到服务器,上传前崩溃。

1:

NSData *imgData; UIImage *img; NSInputStream *stream;

NSMutableURLRequest *request = [[NSMutableURLRequest alloc] initWithURL:[NSURL URLWithString:@"http://my.url.com"]];

for(int i=0; i<_dataContainer.count; i++)
{
    img = [UIImage imageWithCGImage:[[[_dataContainer objectAtIndex:i] defaultRepresentation]fullResolutionImage]];
    imgData = UIImageJPEGRepresentation(img, 1.0);
    stream = [[NSInputStream alloc] initWithData:imgData];
    [request setHTTPBodyStream:stream];
    [request setHTTPMethod:@"POST"];
    [NSURLConnection sendAsynchronousRequest:request queue:[NSOperationQueue mainQueue]
                           completionHandler:^(NSURLResponse *response, NSData *data, NSError *error) {
                               NSLog(@"Finished with status code: %i", [(NSHTTPURLResponse *)response statusCode]);
                           }];
}

2:使用 Afnetworking

AFHTTPClient *client= [[AFHTTPClient alloc]initWithBaseURL:[NSURL URLWithString:@"http://my.url.com"]];
     NSURLRequest *myRequest;
    __block UIImage *img;
    __block NSData *imgData;
    __block NSString *fName;


    myRequest = [client multipartFormRequestWithMethod:@"POST" path:@"/images/mypage.php" parameters:nil constructingBodyWithBlock:
                 ^(id <AFMultipartFormData>formData)
                 {                     
                     img = [UIImage imageWithCGImage:[[[_dataContainer objectAtIndex:0] defaultRepresentation]fullResolutionImage]];
                     imgData = UIImageJPEGRepresentation(img, 1.0);
                     fName = [self returnDateTimeWithMilliSeconds];

                     [formData appendPartWithFileData:imgData name:@"photo" fileName:[NSString stringWithFormat:@"%@.jpg",fName] mimeType:@"image/jpeg"];

                     NSLog(@"FN=>%@ | Size=>%@",fName, [NSByteCountFormatter stringFromByteCount:[imgData length] countStyle:NSByteCountFormatterCountStyleFile]);
                 }];

    AFHTTPRequestOperation *operation = [[AFHTTPRequestOperation alloc]initWithRequest:myRequest];
    [operation start];

    [operation setCompletionBlockWithSuccess:^(AFHTTPRequestOperation *operation, id responseObject)
     {

         NSLog(@"Success Data -> %@", operation.responseString);
     } failure:^(AFHTTPRequestOperation *operation, NSError *error) {
         NSLog(@"Failed");
     }];

    [operation setUploadProgressBlock:^(NSUInteger bytesWritten, long long totalBytesWritten, long long totalBytesExpectedToWrite) {
        NSLog(@"Progrees -> %f", ((float)((int)totalBytesWritten) / (float)((int)totalBytesExpectedToWrite)));
    }];

最佳答案

@interface MyHTTPClient : AFHTTPClient

+ (id)sharedClient;

@end

@implementation MyHTTPClient

+ (id)sharedClient
{
    static MyHTTPClient *sharedClient;
    static dispatch_once_t onceToken;
    dispatch_once(&onceToken, ^{
        sharedClient = [[MyHTTPClient alloc] initWithBaseURL:nil];
    });
    return sharedClient;
}

@end

@implementation MyViewController

- (void)uploadImages
{
    NSURLRequest *myRequest;
    __block UIImage *img;
    __block NSData *imgData;
    __block NSString *fName;


    myRequest = [client multipartFormRequestWithMethod:@"POST" path:@"/images/mypage.php" parameters:nil constructingBodyWithBlock:
                 ^(id <AFMultipartFormData>formData)
                 {                     
                     img = [UIImage imageWithCGImage:[[[_dataContainer objectAtIndex:0] defaultRepresentation]fullResolutionImage]];
                     imgData = UIImageJPEGRepresentation(img, 1.0);
                     fName = [self returnDateTimeWithMilliSeconds];

                     [formData appendPartWithFileData:imgData name:@"photo" fileName:[NSString stringWithFormat:@"%@.jpg",fName] mimeType:@"image/jpeg"];

                     NSLog(@"FN=>%@ | Size=>%@",fName, [NSByteCountFormatter stringFromByteCount:[imgData length] countStyle:NSByteCountFormatterCountStyleFile]);
                 }];

    AFHTTPRequestOperation *operation = [[AFHTTPRequestOperation alloc]initWithRequest:myRequest];

    [operation setCompletionBlockWithSuccess:^(AFHTTPRequestOperation *operation, id responseObject)
     {

         NSLog(@"Success Data -> %@", operation.responseString);
     } failure:^(AFHTTPRequestOperation *operation, NSError *error) {
         NSLog(@"Failed");
     }];

    [operation setUploadProgressBlock:^(NSUInteger bytesWritten, long long totalBytesWritten, long long totalBytesExpectedToWrite) {
        NSLog(@"Progrees -> %f", ((float)((int)totalBytesWritten) / (float)((int)totalBytesExpectedToWrite)));
    }];

    [[MyHTTPClient sharedClient] enqueueHTTPRequestOperation:operation]
}

@end

关于ios - 需要帮助从 iOS 设备上传多个大图像,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/13932036/

有关ios - 需要帮助从 iOS 设备上传多个大图像的更多相关文章

  1. ruby - 我需要将 Bundler 本身添加到 Gemfile 中吗? - 2

    当我使用Bundler时,是否需要在我的Gemfile中将其列为依赖项?毕竟,我的代码中有些地方需要它。例如,当我进行Bundler设置时:require"bundler/setup" 最佳答案 没有。您可以尝试,但首先您必须用鞋带将自己抬离地面。 关于ruby-我需要将Bundler本身添加到Gemfile中吗?,我们在StackOverflow上找到一个类似的问题: https://stackoverflow.com/questions/4758609/

  2. ruby-on-rails - Rails 3 中的多个路由文件 - 2

    Rails2.3可以选择随时使用RouteSet#add_configuration_file添加更多路由。是否可以在Rails3项目中做同样的事情? 最佳答案 在config/application.rb中:config.paths.config.routes在Rails3.2(也可能是Rails3.1)中,使用:config.paths["config/routes"] 关于ruby-on-rails-Rails3中的多个路由文件,我们在StackOverflow上找到一个类似的问题

  3. ruby-on-rails - 在 Ruby 中循环遍历多个数组 - 2

    我有多个ActiveRecord子类Item的实例数组,我需要根据最早的事件循环打印。在这种情况下,我需要打印付款和维护日期,如下所示:ItemAmaintenancerequiredin5daysItemBpaymentrequiredin6daysItemApaymentrequiredin7daysItemBmaintenancerequiredin8days我目前有两个查询,用于查找maintenance和payment项目(非排他性查询),并输出如下内容:paymentrequiredin...maintenancerequiredin...有什么方法可以改善上述(丑陋的)代

  4. ruby-on-rails - Rails - 一个 View 中的多个模型 - 2

    我需要从一个View访问多个模型。以前,我的links_controller仅用于提供以不同方式排序的链接资源。现在我想包括一个部分(我假设)显示按分数排序的顶级用户(@users=User.all.sort_by(&:score))我知道我可以将此代码插入每个链接操作并从View访问它,但这似乎不是“ruby方式”,我将需要在不久的将来访问更多模型。这可能会变得很脏,是否有针对这种情况的任何技术?注意事项:我认为我的应用程序正朝着单一格式和动态页面内容的方向发展,本质上是一个典型的网络应用程序。我知道before_filter但考虑到我希望应用程序进入的方向,这似乎很麻烦。最终从任何

  5. ruby - rspec 需要 .rspec 文件中的 spec_helper - 2

    我注意到像bundler这样的项目在每个specfile中执行requirespec_helper我还注意到rspec使用选项--require,它允许您在引导rspec时要求一个文件。您还可以将其添加到.rspec文件中,因此只要您运行不带参数的rspec就会添加它。使用上述方法有什么缺点可以解释为什么像bundler这样的项目选择在每个规范文件中都需要spec_helper吗? 最佳答案 我不在Bundler上工作,所以我不能直接谈论他们的做法。并非所有项目都checkin.rspec文件。原因是这个文件,通常按照当前的惯例,只

  6. ruby - 多个属性的 update_column 方法 - 2

    我有一个具有一些属性的模型:attr1、attr2和attr3。我需要在不执行回调和验证的情况下更新此属性。我找到了update_column方法,但我想同时更新三个属性。我需要这样的东西:update_columns({attr1:val1,attr2:val2,attr3:val3})代替update_column(attr1,val1)update_column(attr2,val2)update_column(attr3,val3) 最佳答案 您可以使用update_columns(attr1:val1,attr2:val2

  7. ruby - 我可以使用 aws-sdk-ruby 在 AWS S3 上使用事务性文件删除/上传吗? - 2

    我发现ActiveRecord::Base.transaction在复杂方法中非常有效。我想知道是否可以在如下事务中从AWSS3上传/删除文件:S3Object.transactiondo#writeintofiles#raiseanexceptionend引发异常后,每个操作都应在S3上回滚。S3Object这可能吗?? 最佳答案 虽然S3API具有批量删除功能,但它不支持事务,因为每个删除操作都可以独立于其他操作成功/失败。该API不提供任何批量上传功能(通过PUT或POST),因此每个上传操作都是通过一个独立的API调用完成的

  8. ruby - 如何在 Lion 上安装 Xcode 4.6,需要用 RVM 升级 ruby - 2

    我实际上是在尝试使用RVM在我的OSX10.7.5上更新ruby,并在输入以下命令后:rvminstallruby我得到了以下回复:Searchingforbinaryrubies,thismighttakesometime.Checkingrequirementsforosx.Installingrequirementsforosx.Updatingsystem.......Errorrunning'requirements_osx_brew_update_systemruby-2.0.0-p247',pleaseread/Users/username/.rvm/log/138121

  9. ruby-on-rails - 在 ruby​​ .gemspec 文件中,如何指定依赖项的多个版本? - 2

    我正在尝试修改当前依赖于定义为activeresource的gem:s.add_dependency"activeresource","~>3.0"为了让gem与Rails4一起工作,我需要扩展依赖关系以与activeresource的版本3或4一起工作。我不想简单地添加以下内容,因为它可能会在以后引起问题:s.add_dependency"activeresource",">=3.0"有没有办法指定可接受版本的列表?~>3.0还是~>4.0? 最佳答案 根据thedocumentation,如果你想要3到4之间的所有版本,你可以这

  10. ruby - 如何验证 IO.copy_stream 是否成功 - 2

    这里有一个很好的答案解释了如何在Ruby中下载文件而不将其加载到内存中:https://stackoverflow.com/a/29743394/4852737require'open-uri'download=open('http://example.com/image.png')IO.copy_stream(download,'~/image.png')我如何验证下载文件的IO.copy_stream调用是否真的成功——这意味着下载的文件与我打算下载的文件完全相同,而不是下载一半的损坏文件?documentation说IO.copy_stream返回它复制的字节数,但是当我还没有下

随机推荐