本文所涉及到的yolov5网络为6.1版本（6.0-6.2均适用）
yolov5加入注意力机制模块的三个标准步骤（适用于本文中的任何注意力机制）
1.common.py中加入注意力机制模块
2.yolo.py中增加对应的注意力机制关键字
3.yaml文件中添加相应模块
注：所有注意力机制的添加方法都是一致的，加入注意力机制是否有效的关键在于注意力机制添加的位置，本文提供两种常用常用方法。
注：需要下列所有注意力机制已经改好的代码版本及yaml文件（到手即用），请私聊我（免费）
目录
class ChannelAttention(nn.Module):
def __init__(self, in_planes, ratio=16):
super(ChannelAttention, self).__init__()
self.avg_pool = nn.AdaptiveAvgPool2d(1)
self.max_pool = nn.AdaptiveMaxPool2d(1)
self.f1 = nn.Conv2d(in_planes, in_planes // ratio, 1, bias=False)
self.relu = nn.ReLU()
self.f2 = nn.Conv2d(in_planes // ratio, in_planes, 1, bias=False)
self.sigmoid = nn.Sigmoid()
def forward(self, x):
avg_out = self.f2(self.relu(self.f1(self.avg_pool(x))))
max_out = self.f2(self.relu(self.f1(self.max_pool(x))))
out = self.sigmoid(avg_out + max_out)
return out
class SpatialAttention(nn.Module):
def __init__(self, kernel_size=7):
super(SpatialAttention, self).__init__()
assert kernel_size in (3, 7), 'kernel size must be 3 or 7'
padding = 3 if kernel_size == 7 else 1
self.conv = nn.Conv2d(2, 1, kernel_size, padding=padding, bias=False)
self.sigmoid = nn.Sigmoid()
def forward(self, x):
avg_out = torch.mean(x, dim=1, keepdim=True)
max_out, _ = torch.max(x, dim=1, keepdim=True)
x = torch.cat([avg_out, max_out], dim=1)
x = self.conv(x)
return self.sigmoid(x)
class CBAM(nn.Module):
# CSP Bottleneck with 3 convolutions
def __init__(self, c1, c2, ratio=16, kernel_size=7): # ch_in, ch_out, number, shortcut, groups, expansion
super(CBAM, self).__init__()
# c_ = int(c2 * e) # hidden channels
# self.cv1 = Conv(c1, c_, 1, 1)
# self.cv2 = Conv(c1, c_, 1, 1)
# self.cv3 = Conv(2 * c_, c2, 1)
# self.m = nn.Sequential(*[Bottleneck(c_, c_, shortcut, g, e=1.0) for _ in range(n)])
self.channel_attention = ChannelAttention(c1, ratio)
self.spatial_attention = SpatialAttention(kernel_size)
# self.m = nn.Sequential(*[CrossConv(c_, c_, 3, 1, g, 1.0, shortcut) for _ in range(n)])
def forward(self, x):
out = self.channel_attention(x) * x
# print('outchannels:{}'.format(out.shape))
out = self.spatial_attention(out) * out
return out以上代码需要添加在models文件夹下的common.py文件中，具体添加位置如果找不准可以选择common.py文件的最底端（最稳妥的做法，肯定不会错），或者C3模块后面（方便查找）。
第二步，需要更改models文件夹下的yolo.py文件。可以直接ctrl+F 然后查找parse_model关键字，定位到parse_model函数，你会发现有一段这样的代码
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x]:
args.insert(2, n) # number of repeats
n = 1我们仅需在第1行和第8行末尾添加CBAM即可，具体做法如下
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, CBAM):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x, CBAM]:
args.insert(2, n) # number of repeats
n = 1第三步，就是最为关键的改动yaml文件了，我们以yolov5s.yaml为例进行改进，这里仅截取关键部分，未截取部分则不做改动。
第一个版本是将CBAM放在backbone部分的最末端，这样可以使注意力机制看到整个backbone部分的特征图，将具有全局视野，类似于一个小transformer结构。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 1, Conv, [256, 3, 2]], # 3-P3/8
[-1, 6, C3, [256]],
[-1, 1, Conv, [512, 3, 2]], # 5-P4/16
[-1, 9, C3, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 7-P5/32
[-1, 3, C3, [1024]],
[-1, 1, SPPF, [1024, 5]], # 9
[-1, 3, CBAM, [1024]], # 10
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 14
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 4], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 18 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 15], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 21 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 11], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 24 (P5/32-large)
[[18, 21, 24], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]
第二个版本是将CBAM放在backbone部分每个C3模块的后面，这样可以使注意力机制看到局部的特征，每层进行一次注意力，可以分担学习压力。
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 3, CBAM, [128]], # 3
[-1, 1, Conv, [256, 3, 2]], # 4-P3/8
[-1, 6, C3, [256]],
[-1, 3, CBAM, [256]],
[-1, 1, Conv, [512, 3, 2]], # 7-P4/16
[-1, 9, C3, [512]],
[-1, 3, CBAM, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 10 -P5/32
[-1, 3, C3, [1024]],
[-1, 3, CBAM, [1024]],
[-1, 1, SPPF, [1024, 5]], # 13
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 9], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 17
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 21 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 18], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 24 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 14], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 27 (P5/32-large)
[[21, 24, 27], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]同理，首先将下方代码添加在models文件夹下的common.py文件中，具体添加位置如果找不准可以选择common.py文件的最底端（最稳妥的做法，肯定不会错），或者C3模块后面（方便查找）。
class SE(nn.Module):
def __init__(self, c1, c2, r=16):
super(SE, self).__init__()
self.avgpool = nn.AdaptiveAvgPool2d(1)
self.l1 = nn.Linear(c1, c1 // r, bias=False)
self.relu = nn.ReLU(inplace=True)
self.l2 = nn.Linear(c1 // r, c1, bias=False)
self.sig = nn.Sigmoid()
def forward(self, x):
b, c, _, _ = x.size()
y = self.avgpool(x).view(b, c)
y = self.l1(y)
y = self.relu(y)
y = self.l2(y)
y = self.sig(y)
y = y.view(b, c, 1, 1)
return x * y.expand_as(x)第二步，需要更改models文件夹下的yolo.py文件。可以直接ctrl+F 然后查找parse_model关键字，定位到parse_model函数，你会发现有一段这样的代码
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x]:
args.insert(2, n) # number of repeats
n = 1我们仅需在第1行和第8行末尾添加SE即可，具体做法如下
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, SE):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x, SE]:
args.insert(2, n) # number of repeats
n = 1第三步，就是最为关键的改动yaml文件了，我们以yolov5s.yaml为例进行改进，这里仅截取关键部分，未截取部分则不做改动。
第一个版本是将SE放在backbone部分的最末端，这样可以使注意力机制看到整个backbone部分的特征图，将具有全局视野，类似于一个小transformer结构。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 1, Conv, [256, 3, 2]], # 3-P3/8
[-1, 6, C3, [256]],
[-1, 1, Conv, [512, 3, 2]], # 5-P4/16
[-1, 9, C3, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 7-P5/32
[-1, 3, C3, [1024]],
[-1, 1, SPPF, [1024, 5]], # 9
[-1, 3, SE, [1024]], # 10
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 14
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 4], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 18 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 15], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 21 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 11], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 24 (P5/32-large)
[[18, 21, 24], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]
第二个版本是将SE放在backbone部分每个C3模块的后面，这样可以使注意力机制看到局部的特征，每层进行一次注意力，可以分担学习压力。
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 3, SE, [128]], # 3
[-1, 1, Conv, [256, 3, 2]], # 4-P3/8
[-1, 6, C3, [256]],
[-1, 3, SE, [256]],
[-1, 1, Conv, [512, 3, 2]], # 7-P4/16
[-1, 9, C3, [512]],
[-1, 3, SE, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 10 -P5/32
[-1, 3, C3, [1024]],
[-1, 3, SE, [1024]],
[-1, 1, SPPF, [1024, 5]], # 13
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 9], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 17
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 21 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 18], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 24 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 14], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 27 (P5/32-large)
[[21, 24, 27], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]同理，首先将下方代码添加在models文件夹下的common.py文件中，具体添加位置如果找不准可以选择common.py文件的最底端（最稳妥的做法，肯定不会错），或者C3模块后面（方便查找）。
class h_sigmoid(nn.Module):
def __init__(self, inplace=True):
super(h_sigmoid, self).__init__()
self.relu = nn.ReLU6(inplace=inplace)
def forward(self, x):
return self.relu(x + 3) / 6
class h_swish(nn.Module):
def __init__(self, inplace=True):
super(h_swish, self).__init__()
self.sigmoid = h_sigmoid(inplace=inplace)
def forward(self, x):
return x * self.sigmoid(x)
class CA(nn.Module):
def __init__(self, inp, oup, reduction=32):
super(CA, self).__init__()
self.pool_h = nn.AdaptiveAvgPool2d((None, 1))
self.pool_w = nn.AdaptiveAvgPool2d((1, None))
mip = max(8, inp // reduction)
self.conv1 = nn.Conv2d(inp, mip, kernel_size=1, stride=1, padding=0)
self.bn1 = nn.BatchNorm2d(mip)
self.act = h_swish()
self.conv_h = nn.Conv2d(mip, oup, kernel_size=1, stride=1, padding=0)
self.conv_w = nn.Conv2d(mip, oup, kernel_size=1, stride=1, padding=0)
def forward(self, x):
identity = x
n, c, h, w = x.size()
x_h = self.pool_h(x)
x_w = self.pool_w(x).permute(0, 1, 3, 2)
y = torch.cat([x_h, x_w], dim=2)
y = self.conv1(y)
y = self.bn1(y)
y = self.act(y)
x_h, x_w = torch.split(y, [h, w], dim=2)
x_w = x_w.permute(0, 1, 3, 2)
a_h = self.conv_h(x_h).sigmoid()
a_w = self.conv_w(x_w).sigmoid()
out = identity * a_w * a_h
return outECA注意力机制比较特殊，不需要改动models文件夹下的yolo.py文件，可直接使用。
第三步，就是最为关键的改动yaml文件了，我们以yolov5s.yaml为例进行改进，这里仅截取关键部分，未截取部分则不做改动。
第一个版本是将ECA放在backbone部分的最末端，这样可以使注意力机制看到整个backbone部分的特征图，将具有全局视野，类似于一个小transformer结构。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 1, Conv, [256, 3, 2]], # 3-P3/8
[-1, 6, C3, [256]],
[-1, 1, Conv, [512, 3, 2]], # 5-P4/16
[-1, 9, C3, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 7-P5/32
[-1, 3, C3, [1024]],
[-1, 1, SPPF, [1024, 5]], # 9
[-1, 3, SE, [1024]], # 10
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 14
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 4], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 18 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 15], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 21 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 11], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 24 (P5/32-large)
[[18, 21, 24], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]
第二个版本是将ECA放在backbone部分每个C3模块的后面，这样可以使注意力机制看到局部的特征，每层进行一次注意力，可以分担学习压力。
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 3, SE, [128]], # 3
[-1, 1, Conv, [256, 3, 2]], # 4-P3/8
[-1, 6, C3, [256]],
[-1, 3, SE, [256]],
[-1, 1, Conv, [512, 3, 2]], # 7-P4/16
[-1, 9, C3, [512]],
[-1, 3, SE, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 10 -P5/32
[-1, 3, C3, [1024]],
[-1, 3, SE, [1024]],
[-1, 1, SPPF, [1024, 5]], # 13
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 9], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 17
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 21 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 18], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 24 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 14], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 27 (P5/32-large)
[[21, 24, 27], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]同理，首先将下方代码添加在models文件夹下的common.py文件中，具体添加位置如果找不准可以选择common.py文件的最底端（最稳妥的做法，肯定不会错），或者C3模块后面（方便查找）。
class ECA(nn.Module):
"""Constructs a ECA module.
Args:
channel: Number of channels of the input feature map
k_size: Adaptive selection of kernel size
"""
def __init__(self, channel, k_size=3):
super(ECA, self).__init__()
self.avg_pool = nn.AdaptiveAvgPool2d(1)
self.conv = nn.Conv1d(1, 1, kernel_size=k_size, padding=(k_size - 1) // 2, bias=False)
self.sigmoid = nn.Sigmoid()
def forward(self, x):
# feature descriptor on the global spatial information
y = self.avg_pool(x)
# Two different branches of ECA module
y = self.conv(y.squeeze(-1).transpose(-1, -2)).transpose(-1, -2).unsqueeze(-1)
# Multi-scale information fusion
y = self.sigmoid(y)
x= x*y.expand_as(x)
return x * y.expand_as(x)第二步，需要更改models文件夹下的yolo.py文件。可以直接ctrl+F 然后查找parse_model关键字，定位到parse_model函数，你会发现有一段这样的代码
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x]:
args.insert(2, n) # number of repeats
n = 1我们仅需在第1行和第8行末尾添加SE即可，具体做法如下
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, SE):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x, SE]:
args.insert(2, n) # number of repeats
n = 1
第一个版本是将CA放在backbone部分的最末端，这样可以使注意力机制看到整个backbone部分的特征图，将具有全局视野，类似于一个小transformer结构。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 1, Conv, [256, 3, 2]], # 3-P3/8
[-1, 6, C3, [256]],
[-1, 1, Conv, [512, 3, 2]], # 5-P4/16
[-1, 9, C3, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 7-P5/32
[-1, 3, C3, [1024]],
[-1, 1, SPPF, [1024, 5]], # 9
[-1, 3, CA, [1024]], # 10
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 14
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 4], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 18 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 15], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 21 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 11], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 24 (P5/32-large)
[[18, 21, 24], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]
第二个版本是将CA放在backbone部分每个C3模块的后面，这样可以使注意力机制看到局部的特征，每层进行一次注意力，可以分担学习压力。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 3, CA, [128]], # 3
[-1, 1, Conv, [256, 3, 2]], # 4-P3/8
[-1, 6, C3, [256]],
[-1, 3, CA, [256]],
[-1, 1, Conv, [512, 3, 2]], # 7-P4/16
[-1, 9, C3, [512]],
[-1, 3, CA, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 10 -P5/32
[-1, 3, C3, [1024]],
[-1, 3, CA, [1024]],
[-1, 1, SPPF, [1024, 5]], # 13
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 9], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 17
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 21 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 18], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 24 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 14], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 27 (P5/32-large)
[[21, 24, 27], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]
同理，首先将下方代码添加在models文件夹下的common.py文件中，具体添加位置如果找不准可以选择common.py文件的最底端（最稳妥的做法，肯定不会错），或者C3模块后面（方便查找）。
class SimAM(torch.nn.Module):
def __init__(self, channels = None,out_channels = None, e_lambda = 1e-4):
super(SimAM, self).__init__()
self.activaton = nn.Sigmoid()
self.e_lambda = e_lambda
def forward(self, x):
b, c, h, w = x.size()
n = w * h - 1
x_minus_mu_square = (x - x.mean(dim=[2,3], keepdim=True)).pow(2)
y = x_minus_mu_square / (4 * (x_minus_mu_square.sum(dim=[2,3], keepdim=True) / n + self.e_lambda)) + 0.5
return x * self.activaton(y)
第二步，需要更改models文件夹下的yolo.py文件。可以直接ctrl+F 然后查找parse_model关键字，定位到parse_model函数，你会发现有一段这样的代码
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x]:
args.insert(2, n) # number of repeats
n = 1我们仅需在第1行和第8行末尾添加SimAM即可，具体做法如下
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, SimAM):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x, SimAM]:
args.insert(2, n) # number of repeats
n = 1
第一个版本是将SimAM放在backbone部分的最末端，这样可以使注意力机制看到整个backbone部分的特征图，将具有全局视野，类似于一个小transformer结构。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 1, Conv, [256, 3, 2]], # 3-P3/8
[-1, 6, C3, [256]],
[-1, 1, Conv, [512, 3, 2]], # 5-P4/16
[-1, 9, C3, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 7-P5/32
[-1, 3, C3, [1024]],
[-1, 1, SPPF, [1024, 5]], # 9
[-1, 3, SimAM, [1024]], # 10
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 14
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 4], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 18 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 15], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 21 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 11], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 24 (P5/32-large)
[[18, 21, 24], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]
第二个版本是将SimAM放在backbone部分每个C3模块的后面，这样可以使注意力机制看到局部的特征，每层进行一次注意力，可以分担学习压力。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 3, SimAM, [128]], # 3
[-1, 1, Conv, [256, 3, 2]], # 4-P3/8
[-1, 6, C3, [256]],
[-1, 3, SimAM, [256]],
[-1, 1, Conv, [512, 3, 2]], # 7-P4/16
[-1, 9, C3, [512]],
[-1, 3, SimAM, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 10 -P5/32
[-1, 3, C3, [1024]],
[-1, 3, SimAM, [1024]],
[-1, 1, SPPF, [1024, 5]], # 13
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 9], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 17
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 21 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 18], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 24 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 14], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 27 (P5/32-large)
[[21, 24, 27], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]同理，首先将下方代码添加在models文件夹下的common.py文件中，具体添加位置如果找不准可以选择common.py文件的最底端（最稳妥的做法，肯定不会错），或者C3模块后面（方便查找）。
class ShuffleAttention(nn.Module):
def __init__(self, channel=512,reduction=16,G=8):
super().__init__()
self.G=G
self.channel=channel
self.avg_pool = nn.AdaptiveAvgPool2d(1)
self.gn = nn.GroupNorm(channel // (2 * G), channel // (2 * G))
self.cweight = torch.ones(1, channel // (2 * G), 1, 1)
self.cbias = torch.ones(1, channel // (2 * G), 1, 1)
self.sweight = torch.ones(1, channel // (2 * G), 1, 1)
self.sbias = torch.ones(1, channel // (2 * G), 1, 1)
self.sigmoid=nn.Sigmoid()
@staticmethod
def channel_shuffle(x, groups):
b, c, h, w = x.shape
x = x.reshape(b, groups, -1, h, w)
x = x.permute(0, 2, 1, 3, 4)
# flatten
x = x.reshape(b, -1, h, w)
return x
def forward(self, x):
b, c, h, w = x.size()
#group into subfeatures
x=x.view(b*self.G,-1,h,w) #bs*G,c//G,h,w
#channel_split
x_0,x_1=x.chunk(2,dim=1) #bs*G,c//(2*G),h,w
#channel attention
x_channel=self.avg_pool(x_0) #bs*G,c//(2*G),1,1
x_channel=self.cweight*x_channel+self.cbias #bs*G,c//(2*G),1,1
x_channel=x_0*self.sigmoid(x_channel)
#spatial attention
x_spatial=self.gn(x_1) #bs*G,c//(2*G),h,w
x_spatial=self.sweight*x_spatial+self.sbias #bs*G,c//(2*G),h,w
x_spatial=x_1*self.sigmoid(x_spatial) #bs*G,c//(2*G),h,w
# concatenate along channel axis
out=torch.cat([x_channel,x_spatial],dim=1) #bs*G,c//G,h,w
out=out.contiguous().view(b,-1,h,w)
# channel shuffle
out = self.channel_shuffle(out, 2)
return out第二步，需要更改models文件夹下的yolo.py文件。可以直接ctrl+F 然后查找parse_model关键字，定位到parse_model函数，你会发现有一段这样的代码
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x]:
args.insert(2, n) # number of repeats
n = 1我们仅需在第1行和第8行末尾添加ShuffleAttention即可，具体做法如下
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, ShuffleAttention):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x, ShuffleAttention]:
args.insert(2, n) # number of repeats
n = 1
第一个版本是将ShuffleAttention放在backbone部分的最末端，这样可以使注意力机制看到整个backbone部分的特征图，将具有全局视野，类似于一个小transformer结构。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 1, Conv, [256, 3, 2]], # 3-P3/8
[-1, 6, C3, [256]],
[-1, 1, Conv, [512, 3, 2]], # 5-P4/16
[-1, 9, C3, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 7-P5/32
[-1, 3, C3, [1024]],
[-1, 1, SPPF, [1024, 5]], # 9
[-1, 3, ShuffleAttention, [1024]], # 10
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 14
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 4], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 18 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 15], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 21 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 11], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 24 (P5/32-large)
[[18, 21, 24], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]
第二个版本是将ShuffleAttention放在backbone部分每个C3模块的后面，这样可以使注意力机制看到局部的特征，每层进行一次注意力，可以分担学习压力。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 3, ShuffleAttention, [128]], # 3
[-1, 1, Conv, [256, 3, 2]], # 4-P3/8
[-1, 6, C3, [256]],
[-1, 3, ShuffleAttention, [256]],
[-1, 1, Conv, [512, 3, 2]], # 7-P4/16
[-1, 9, C3, [512]],
[-1, 3, ShuffleAttention, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 10 -P5/32
[-1, 3, C3, [1024]],
[-1, 3, ShuffleAttention, [1024]],
[-1, 1, SPPF, [1024, 5]], # 13
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 9], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 17
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 21 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 18], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 24 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 14], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 27 (P5/32-large)
[[21, 24, 27], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]同理，首先将下方代码添加在models文件夹下的common.py文件中，具体添加位置如果找不准可以选择common.py文件的最底端（最稳妥的做法，肯定不会错），或者C3模块后面（方便查找）。
def INF(B,H,W):
return -torch.diag(torch.tensor(float("inf")).repeat(H),0).unsqueeze(0).repeat(B*W,1,1).cuda()
class CrissCrossAttention(nn.Module):
""" Criss-Cross Attention Module"""
def __init__(self, in_dim, out_channels, none):
super(CrissCrossAttention,self).__init__()
self.query_conv = nn.Conv2d(in_channels=in_dim, out_channels=in_dim//8, kernel_size=1)
self.key_conv = nn.Conv2d(in_channels=in_dim, out_channels=in_dim//8, kernel_size=1)
self.value_conv = nn.Conv2d(in_channels=in_dim, out_channels=in_dim, kernel_size=1)
self.softmax = nn.Softmax(dim=3)
self.INF = INF
self.gamma = nn.Parameter(torch.zeros(1))
def forward(self, x):
m_batchsize, _, height, width = x.size()
proj_query = self.query_conv(x)
proj_query_H = proj_query.permute(0,3,1,2).contiguous().view(m_batchsize*width,-1,height).permute(0, 2, 1)
proj_query_W = proj_query.permute(0,2,1,3).contiguous().view(m_batchsize*height,-1,width).permute(0, 2, 1)
proj_key = self.key_conv(x)
proj_key_H = proj_key.permute(0,3,1,2).contiguous().view(m_batchsize*width,-1,height)
proj_key_W = proj_key.permute(0,2,1,3).contiguous().view(m_batchsize*height,-1,width)
proj_value = self.value_conv(x)
proj_value_H = proj_value.permute(0,3,1,2).contiguous().view(m_batchsize*width,-1,height)
proj_value_W = proj_value.permute(0,2,1,3).contiguous().view(m_batchsize*height,-1,width)
energy_H = (torch.bmm(proj_query_H, proj_key_H)+self.INF(m_batchsize, height, width)).view(m_batchsize,width,height,height).permute(0,2,1,3)
energy_W = torch.bmm(proj_query_W, proj_key_W).view(m_batchsize,height,width,width)
concate = self.softmax(torch.cat([energy_H, energy_W], 3))
att_H = concate[:,:,:,0:height].permute(0,2,1,3).contiguous().view(m_batchsize*width,height,height)
#print(concate)
#print(att_H)
att_W = concate[:,:,:,height:height+width].contiguous().view(m_batchsize*height,width,width)
out_H = torch.bmm(proj_value_H, att_H.permute(0, 2, 1)).view(m_batchsize,width,-1,height).permute(0,2,3,1)
out_W = torch.bmm(proj_value_W, att_W.permute(0, 2, 1)).view(m_batchsize,height,-1,width).permute(0,2,1,3)
#print(out_H.size(),out_W.size())
return self.gamma*(out_H + out_W) + x第二步，需要更改models文件夹下的yolo.py文件。可以直接ctrl+F 然后查找parse_model关键字，定位到parse_model函数，你会发现有一段这样的代码
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3TR, C3Ghost, C3x]:
args.insert(2, n) # number of repeats
n = 1我们仅需在第1行和第8行末尾添加CrissCrossAttention即可，具体做法如下
if m in (Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,
BottleneckCSP, C3, C3new, C3new2, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, CrissCrossAttention):
c1, c2 = ch[f], args[0]
if c2 != no: # if not output
c2 = make_divisible(c2 * gw, 8)
args = [c1, c2, *args[1:]]
if m in [BottleneckCSP, C3, C3new, C3new2, C3TR, C3Ghost, C3x, CrissCrossAttention]:
args.insert(2, n) # number of repeats
n = 1
第一个版本是将CrissCrossAttention放在backbone部分的最末端，这样可以使注意力机制看到整个backbone部分的特征图，将具有全局视野，类似于一个小transformer结构。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 1, Conv, [256, 3, 2]], # 3-P3/8
[-1, 6, C3, [256]],
[-1, 1, Conv, [512, 3, 2]], # 5-P4/16
[-1, 9, C3, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 7-P5/32
[-1, 3, C3, [1024]],
[-1, 1, SPPF, [1024, 5]], # 9
[-1, 3, CrissCrossAttention, [1024]], # 10
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 14
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 4], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 18 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 15], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 21 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 11], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 24 (P5/32-large)
[[18, 21, 24], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]
第二个版本是将CrissCrossAttention放在backbone部分每个C3模块的后面，这样可以使注意力机制看到局部的特征，每层进行一次注意力，可以分担学习压力。
# YOLOv5 v6.0 backbone
backbone:
# [from, number, module, args]
[[-1, 1, Conv, [64, 6, 2, 2]], # 0-P1/2
[-1, 1, Conv, [128, 3, 2]], # 1-P2/4
[-1, 3, C3, [128]],
[-1, 3, CrissCrossAttention, [128]], # 3
[-1, 1, Conv, [256, 3, 2]], # 4-P3/8
[-1, 6, C3, [256]],
[-1, 3, CrissCrossAttention, [256]],
[-1, 1, Conv, [512, 3, 2]], # 7-P4/16
[-1, 9, C3, [512]],
[-1, 3, CrissCrossAttention, [512]],
[-1, 1, Conv, [1024, 3, 2]], # 10 -P5/32
[-1, 3, C3, [1024]],
[-1, 3, CrissCrossAttention, [1024]],
[-1, 1, SPPF, [1024, 5]], # 13
]
# YOLOv5 v6.0 head
head:
[[-1, 1, Conv, [512, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 9], 1, Concat, [1]], # cat backbone P4
[-1, 3, C3, [512, False]], # 17
[-1, 1, Conv, [256, 1, 1]],
[-1, 1, nn.Upsample, [None, 2, 'nearest']],
[[-1, 6], 1, Concat, [1]], # cat backbone P3
[-1, 3, C3, [256, False]], # 21 (P3/8-small)
[-1, 1, Conv, [256, 3, 2]],
[[-1, 18], 1, Concat, [1]], # cat head P4
[-1, 3, C3, [512, False]], # 24 (P4/16-medium)
[-1, 1, Conv, [512, 3, 2]],
[[-1, 14], 1, Concat, [1]], # cat head P5
[-1, 3, C3, [1024, False]], # 27 (P5/32-large)
[[21, 24, 27], 1, Detect, [nc, anchors]], # Detect(P3, P4, P5)
]
Arel3.0.2提供了两个类来指定连接类型:Arel::Nodes::InnerJoin和Arel::Nodes::OuterJoin并使用InnerJoin默认。foo=Arel::Table.new('foo')bar=Arel::Table.new('bar')foo.join(bar,Arel::Nodes::InnerJoin)#innerfoo.join(bar,Arel::Nodes::OuterJoin)#outerfoo.join(bar,???)#left如果要生成左连接，如何连接两个表？ 最佳答案 你可以使用
作为新的阿里云用户，您可以50免费试用多种优惠，价值高达1,700美元（或8,500美元）。这将让您了解和体验阿里云平台上提供的一系列产品和服务。如果您以个人身份注册免费试用，您将获得价值1,700美元的优惠。但是，如果您是注册公司，您可以选择企业免费试用，提交基本信息通过企业实名注册验证，即可开始价值$8,500的免费试用！本教程介绍了如何设置您的帐户并使用您的免费试用版。关于免费试用在我们开始此试用之前，您还必须遵守以下条款和条件才能访问您的免费试用：只有在一年内创建的账户才有资格获得阿里云免费试用。通过此免费试用优惠，用户可以免费试用免费试用活动页面上列出的每种产品一次。如果您有多个帐
希望我没有误解“ducktyping”的含义，但从我读到的内容来看，这意味着我应该根据对象如何响应方法而不是它是什么类型/类来编写代码。代码如下:defconvert_hash(hash)ifhash.keys.all?{|k|k.is_a?(Integer)}returnhashelsifhash.keys.all?{|k|k.is_a?(Property)}new_hash={}hash.each_pair{|k,v|new_hash[k.id]=v}returnnew_hashelseraise"CustomattributekeysshouldbeID'sorPropertyo
我正在用Ruby编写DSL来控制我正在处理的Arduino项目；巴尔迪诺。这是一只酒吧猴子，将由软件控制来提供饮料。Arduino通过串行端口接收命令，告诉Arduino要打开什么泵以及打开多长时间。它目前正在读取一个食谱(见下文)并将其打印出来。串行通信的代码以及我在下面提到的其他一些想法仍然需要改进。这是我的第一个DSL，我正在处理之前的示例，所以它的边缘非常粗糙。任何批评、代码改进(是否有任何关于RubyDSL最佳实践或习语的良好引用？)或任何一般性评论。我目前有DSL的粗略草稿，因此饮料配方如下所示(Githublink):desc"Simpleglassofwater"rec
视频有很多事件我正在尝试获取所有在未来安排了事件的视频。我已经有了这个:named_scope:scheduled_in_future,:joins=>:event,:conditions=>["event.scheduled_start>?ANDevent.status=?",Time.now.to_i,'PENDING']这行得通，但如果同一个视频在未来有多个事件，它会给我重复的视频记录。当然，我可以遍历数组并清除重复项，但必须有一种SQL方法才能做到这一点。我尝试添加一个:select=>"DISTINCT(video.id)"但它只返回ID字段而不是整个记录。
我正在使用RubyonRails3.2.2，我想知道在范围方法中是否可以“动态”连接一个表，前提是该表尚未连接。那它，我有:defself.scope_method_name(user)joins(:joining_association_name).where("joining_table_name.user_id=?",user.id)end我想做如下的东西:#Note:thefollowingcodeisjustasampleinordertounderstandwhatImean.defself.scope_method_name(user)iftable_is_joined?
我正在尝试使用ruby改进来应用Rails钩子(Hook)。我想避免猴子补丁。当猴子修补时它会这样工作ActiveRecord::Base.class_evaldoafter_finddo#dosomethingwithmy_methodenddefmy_method#somethingusefulendend我已经能够通过做这样的事情来拥有类方法:moduleActiveRecordRefinementsrefineActiveRecord::Base.singleton_classdodefmy_method#somethingcoolendendend但我无法运行钩子(Hoo
我正在使用Ruby-Tk为OSX开发一个桌面应用程序，我想为该应用程序提供一个AppleEvents接口(interface)。这意味着应用程序将定义它将响应的AppleScript命令的字典(对应于发送到应用程序的Apple事件)，并且用户/其他应用程序可以使用AppleScript命令编写Ruby-Tk应用程序的脚本。其他脚本语言支持此类功能——Python通过位于http://appscript.svn.sourceforge.net/viewvc/appscript/py-aemreceive/的py-aemreceive库和Tcl通过位于http://tclae.source
Method#unbind返回对该方法的UnboundMethod引用，稍后可以使用UnboundMethod#bind将其绑定(bind)到另一个对象.classFooattr_reader:bazdefinitialize(baz)@baz=bazendendclassBardefinitialize(baz)@baz=bazendendf=Foo.new(:test1)g=Foo.new(:test2)h=Bar.new(:test3)f.method(:baz).unbind.bind(g).call#=>:test2f.method(:baz).unbind.bind(h).
您可以使用优化您的类(class)moduleRefinedStringrefineStringdodefto_boolean(text)!!(text=~/^(true|t|yes|y|1)$/i)endendend但是如何细化模块方法呢？这:moduleRefinedMathrefineMathdodefPI22/7endendend引发:TypeError:错误的参数类型模块(预期类) 最佳答案 这段代码可以工作:moduleMathdefself.piputs'originalmethod'endendmoduleRefin