草庐IT

android - 如何在 Android 中定期查找 gps 位置

coder 2023-11-24 原文

我正在编写一个应用程序,每十分钟记录一次新的 GPS 位置。

我尝试过位置轮询器、将位置监听器放入服务中以及将位置监听器放入 Activity 中,但这些方法都不适合我。

我需要一种方法在开始记录我的位置数据前 2 分钟打开 gps 位置监听器(让 gps 有足够的时间找到位置或确定没有信号)。我一直在通过使用在我调用 updatelocation 类之前 2 分钟调用我的 gpsActivity 的警报来执行此操作。然后,我的 updatelocation 类采用 gpsActivity 的位置管理器并从中提取位置。

理论上这应该可行,但是当我把它放在手机上时,我总是收到错误数据(准确度太低或根本没有信号)

如果有人能帮助我,我将不胜感激。

谢谢

警报在更新位置前 2 分钟调用此类

public class GPSActivity extends Activity {

    public static LocationListener loc_listener = null;
    public static LocationManager locationManager = null;

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        locationManager = (LocationManager) getSystemService(LOCATION_SERVICE);
        getGPS();
    }

    public static void getGPS() {
        if (loc_listener == null) {
            loc_listener = new LocationListener() {

                @Override
                public void onStatusChanged(String provider, int status,
                        Bundle extras) {}

                @Override
                public void onProviderEnabled(String provider) {}

                @Override
                public void onProviderDisabled(String provider) {}

                @Override
                public void onLocationChanged(Location location) {}
            };
        }
        locationManager.requestLocationUpdates(
                LocationManager.GPS_PROVIDER, 0, 0, loc_listener);
    }

    public static void killGPS() {
        if (locationManager != null && loc_listener != null) {
            locationManager.removeUpdates(loc_listener);
        }
    }
}

然后两分钟后这个服务被调用

public class UpdateLocation extends IntentService {

    public static final String id = "";
    public static int retryCount = 0;
    int notificationID = 1;
    // gets the location manager from the GPSActivity
    LocationManager locationManager = GPSActivity.locationManager;

    @Override
    public void onDestroy() {
        super.onDestroy();
    }

    public UpdateLocation() {
        super("UpdateLocation");
    }

    @Override
    protected void onHandleIntent(Intent intent) {
        locationManager = GPSActivity.locationManager;
        SharedPreferences prefs = getSharedPreferences("Settings", 0);
        final String id = prefs.getString("ID", "");
        HttpParams httpParams = new BasicHttpParams();
        // 30seconds and it stops
        HttpConnectionParams.setConnectionTimeout(httpParams, 30000);
        HttpConnectionParams.setSoTimeout(httpParams, 30000);
        DefaultHttpClient httpclient = new DefaultHttpClient(httpParams);
        HttpPost httpost = new HttpPost(
                "http://iphone-radar.com/gps/gps_locations");
        JSONObject holder = new JSONObject();
        try {
            holder.put("id", id);
            Location location = getLocation();
            if (location != null && (location.getAccuracy() < 25)) {
                retryCount = 0;
                Calendar c = Calendar.getInstance();
                SimpleDateFormat sdf = new SimpleDateFormat(
                        "hh:mmaa MM/dd/yyyy");
                holder.put("time", sdf.format(c.getTime()));
                holder.put("time_since_epoch",
                        System.currentTimeMillis() / 1000);
                holder.put("lat", location.getLatitude());
                holder.put("lon", location.getLongitude());
                StringEntity se = new StringEntity(holder.toString());
                httpost.setEntity(se);
                httpost.setHeader("Accept", "application/json");
                httpost.setHeader("Content-type", "application/json");
                ResponseHandler responseHandler = new BasicResponseHandler();
                String response = httpclient.execute(httpost,
                        responseHandler);
                org.json.JSONObject obj;
                obj = new org.json.JSONObject(response);
                SimpleDateFormat sdf2 = new SimpleDateFormat(
                        "yyyy-MM-dd hh:mm:ssaa");
                addHistory(
                        sdf2.format(c.getTime()),
                        "Background GPS",
                        "Latitude: "
                            + String.format("%.6g%n",
                                    location.getLatitude())
                            + "\n"
                            + "Longitude: "
                            + String.format("%.6g%n",
                                    location.getLongitude()));
                SharedPreferences.Editor editor = prefs.edit();
                editor.putString("LastUpdatedTime", sdf.format(c.getTime()));
                editor.commit();
                Intent setAlarm = new Intent(UpdateLocation.this,
                        UpdateLocation.class);
                PendingIntent pendingIntent = PendingIntent.getService(
                        UpdateLocation.this, 0, setAlarm, 0);
                AlarmManager alarmManager = (AlarmManager) getSystemService(ALARM_SERVICE);
                Calendar calendar = Calendar.getInstance();
                calendar.setTimeInMillis(System.currentTimeMillis());
                int UPDATE_TIME = prefs.getInt("Update_time", 10);
                calendar.add(Calendar.MINUTE, UPDATE_TIME);
                alarmManager.set(AlarmManager.RTC_WAKEUP,
                        calendar.getTimeInMillis(), pendingIntent);
                // sets an alarm for the next time we need to record a
                // location
                GPSActivity.killGPS();
                // turns off the gps location listener
                Intent setAlarm2 = new Intent(UpdateLocation.this,
                        GPSActivity.class);
                PendingIntent pendingIntent2 = PendingIntent.getService(
                        UpdateLocation.this, 0, setAlarm2, 0);
                Calendar calendar2 = Calendar.getInstance();
                calendar2.add(Calendar.MINUTE, UPDATE_TIME - 2);
                alarmManager.set(AlarmManager.RTC_WAKEUP,
                        calendar2.getTimeInMillis(), pendingIntent2);
                // sets an alarm to turn on the gpsActivity 2mins before the
                // next time updatelocation needs to record some data
            }
        } finally {
        }
    }
}

最佳答案

同时使用接收器和服务。为此,您可以在 this link 中找到完整的示例.里面有一个听众。 Listener 可用于您的 Activity ,以通知您已准备好新位置。

关于android - 如何在 Android 中定期查找 gps 位置,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/7740132/

有关android - 如何在 Android 中定期查找 gps 位置的更多相关文章

  1. ruby - 如何在 Ruby 中顺序创建 PI - 2

    出于纯粹的兴趣,我很好奇如何按顺序创建PI,而不是在过程结果之后生成数字,而是让数字在过程本身生成时显示。如果是这种情况,那么数字可以自行产生,我可以对以前看到的数字实现垃圾收集,从而创建一个无限系列。结果只是在Pi系列之后每秒生成一个数字。这是我通过互联网筛选的结果:这是流行的计算机友好算法,类机器算法:defarccot(x,unity)xpow=unity/xn=1sign=1sum=0loopdoterm=xpow/nbreakifterm==0sum+=sign*(xpow/n)xpow/=x*xn+=2sign=-signendsumenddefcalc_pi(digits

  2. ruby - 如何在 buildr 项目中使用 Ruby 代码? - 2

    如何在buildr项目中使用Ruby?我在很多不同的项目中使用过Ruby、JRuby、Java和Clojure。我目前正在使用我的标准Ruby开发一个模拟应用程序,我想尝试使用Clojure后端(我确实喜欢功能代码)以及JRubygui和测试套件。我还可以看到在未来的不同项目中使用Scala作为后端。我想我要为我的项目尝试一下buildr(http://buildr.apache.org/),但我注意到buildr似乎没有设置为在项目中使用JRuby代码本身!这看起来有点傻,因为该工具旨在统一通用的JVM语言并且是在ruby中构建的。除了将输出的jar包含在一个独特的、仅限ruby​​

  3. ruby - 什么是填充的 Base64 编码字符串以及如何在 ruby​​ 中生成它们? - 2

    我正在使用的第三方API的文档状态:"[O]urAPIonlyacceptspaddedBase64encodedstrings."什么是“填充的Base64编码字符串”以及如何在Ruby中生成它们。下面的代码是我第一次尝试创建转换为Base64的JSON格式数据。xa=Base64.encode64(a.to_json) 最佳答案 他们说的padding其实就是Base64本身的一部分。它是末尾的“=”和“==”。Base64将3个字节的数据包编码为4个编码字符。所以如果你的输入数据有长度n和n%3=1=>"=="末尾用于填充n%

  4. ruby-on-rails - 如何在 ruby​​ 中使用两个参数异步运行 exe? - 2

    exe应该在我打开页面时运行。异步进程需要运行。有什么方法可以在ruby​​中使用两个参数异步运行exe吗?我已经尝试过ruby​​命令-system()、exec()但它正在等待过程完成。我需要用参数启动exe,无需等待进程完成是否有任何ruby​​gems会支持我的问题? 最佳答案 您可以使用Process.spawn和Process.wait2:pid=Process.spawn'your.exe','--option'#Later...pid,status=Process.wait2pid您的程序将作为解释器的子进程执行。除

  5. ruby - 如何在续集中重新加载表模式? - 2

    鉴于我有以下迁移:Sequel.migrationdoupdoalter_table:usersdoadd_column:is_admin,:default=>falseend#SequelrunsaDESCRIBEtablestatement,whenthemodelisloaded.#Atthispoint,itdoesnotknowthatusershaveais_adminflag.#Soitfails.@user=User.find(:email=>"admin@fancy-startup.example")@user.is_admin=true@user.save!ende

  6. ruby - 如何在 Ruby 中拆分参数字符串 Bash 样式? - 2

    我正在为一个项目制作一个简单的shell,我希望像在Bash中一样解析参数字符串。foobar"helloworld"fooz应该变成:["foo","bar","helloworld","fooz"]等等。到目前为止,我一直在使用CSV::parse_line,将列分隔符设置为""和.compact输出。问题是我现在必须选择是要支持单引号还是双引号。CSV不支持超过一个分隔符。Python有一个名为shlex的模块:>>>shlex.split("Test'helloworld'foo")['Test','helloworld','foo']>>>shlex.split('Test"

  7. ruby - 如何在 Lion 上安装 Xcode 4.6,需要用 RVM 升级 ruby - 2

    我实际上是在尝试使用RVM在我的OSX10.7.5上更新ruby,并在输入以下命令后:rvminstallruby我得到了以下回复:Searchingforbinaryrubies,thismighttakesometime.Checkingrequirementsforosx.Installingrequirementsforosx.Updatingsystem.......Errorrunning'requirements_osx_brew_update_systemruby-2.0.0-p247',pleaseread/Users/username/.rvm/log/138121

  8. ruby-on-rails - 如何在 ruby​​ 交互式 shell 中有多行? - 2

    这可能是个愚蠢的问题。但是,我是一个新手......你怎么能在交互式ruby​​shell中有多行代码?好像你只能有一条长线。按回车键运行代码。无论如何我可以在不运行代码的情况下跳到下一行吗?再次抱歉,如果这是一个愚蠢的问题。谢谢。 最佳答案 这是一个例子:2.1.2:053>a=1=>12.1.2:054>b=2=>22.1.2:055>a+b=>32.1.2:056>ifa>b#Thecode‘if..."startsthedefinitionoftheconditionalstatement.2.1.2:057?>puts"f

  9. ruby-on-rails - 如何在我的 Rails 应用程序 View 中打印 ruby​​ 变量的内容? - 2

    我是一个Rails初学者,但我想从我的RailsView(html.haml文件)中查看Ruby变量的内容。我试图在ruby​​中打印出变量(认为它会在终端中出现),但没有得到任何结果。有什么建议吗?我知道Rails调试器,但更喜欢使用inspect来打印我的变量。 最佳答案 您可以在View中使用puts方法将信息输出到服务器控制台。您应该能够在View中的任何位置使用Haml执行以下操作:-puts@my_variable.inspect 关于ruby-on-rails-如何在我的R

  10. ruby - 如何在 Rails 4 中使用表单对象之前的验证回调? - 2

    我有一个服务模型/表及其注册表。在表单中,我几乎拥有服务的所有字段,但我想在验证服务对象之前自动设置其中一些值。示例:--服务Controller#创建Action:defcreate@service=Service.new@service_form=ServiceFormObject.new(@service)@service_form.validate(params[:service_form_object])and@service_form.saverespond_with(@service_form,location:admin_services_path)end在验证@ser

随机推荐