我有一个带有二进制 Linux 2.6.18 内核的旧设备，可以正常启动到其 rootfs。但是，如果我尝试从源代码编译这个内核，生成的内核二进制文件将在引导期间卡住。我没有用于构建当前正常启动的先前内核二进制文件的 .config 文件。

引导卡住并且没有提供错误输出。这是启动日志:

Linux version 2.6.18-6.2 (myuser@host) (gcc version 4.2.0 20070124 (prerelease) - BRCM 10ts-20080721) #10 SMP Sun Apr 28 18:25:24 BRT 2013
Fetching vars from bootloader... OK (E,d,B,C)
Detected 512 MB on MEMC0 (strap 0x23430310)
Board strapped at 512 MB, default is 256 MB
Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1
CPU revision is: 0002a044
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
<6>Synthesized TLB refill handler (23 instructions).
<6>Synthesized TLB load handler fastpath (37 instructions).
<6>Synthesized TLB store handler fastpath (37 instructions).
<6>Synthesized TLB modify handler fastpath (36 instructions).
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
Using 32MB for memory, overwrite by passing mem=xx
User-defined physical RAM map:
node [00000000, 02000000: RAM]
node [02000000, 0e000000: RSVD]
node [20000000, 10000000: RAM]
<5>Reserving 224 MB upper memory starting at 02000000
<7>On node 0 totalpages: 65536
<7>  DMA zone: 65536 pages, LIFO batch:15
<7>On node 1 totalpages: 65536
<7>  Normal zone: 65536 pages, LIFO batch:15
Built 2 zonelists.  Total pages: 131072
<5>Kernel command line: root=/dev/mtdblock3 rw rootfstype=jffs2 console=ttyS0,115200
PID hash table entries: 4096 (order: 12, 16384 bytes)
mips_counter_frequency = 202000000 from Calibration, = 202500000 from header(CPU_MHz/2)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 286336k/524288k available (2924k kernel code, 237760k reserved, 544k data, 164k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
plat_prepare_cpus: ENABLING 2nd Thread...
TP0: prom_boot_secondary: Kick off 2nd CPU...
CPU revision is: 0002a044
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
Synthesized TLB refill handler (23 instructions).
Brought up 2 CPUs
migration_cost=1000
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
registering PCI controller with io_map_base unset
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 32768)
TCP reno registered
brcm-pm: disabling power to USB block
brcm-pm: disabling power to ENET block
brcm-pm: disabling power to SATA block
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
JFFS2 version 2.2. (NAND) (SUMMARY)  (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 3 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 22) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 66) is a 16550A
serial8250: ttyS2 at MMIO 0x0 (irq = 67) is a 16550A
loop: loaded (max 8 devices)
brcm-pm: enabling power to ENET block

我该如何调试它？也欢迎任何有关卡住的可能解决方案的见解。

最佳答案

处理此问题的一种方法是启用 CONFIG_EARLY_PRINTK 并在您怀疑卡住的内核代码中添加一些 printk() 语句(很可能某些驱动程序配置参数是错误)。

此外，您可以通过查看 /boot/config-* 或 /proc/config.gz 获取旧的内核配置(它将存在仅当旧内核启用了选项 CONFIG_IKCONFIG_PROC 时)。

关于linux - 如何调试在引导期间卡住的 Linux 内核？，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/16268318/