我正在寻找一种 php 算法,它可以有效地测试一个 cidr 标记的网络是否与另一个网络重叠。
基本上我有以下情况:
cidr 地址数组:
$cidrNetworks = array(
'192.168.10.0/24',
'10.10.0.30/20',
etc.
);
我有一个方法可以将网络添加到数组中,但是当添加的网络与数组中已经存在的网络重叠时,该方法应该抛出异常。
即。如果添加了 192.168.10.0/25,则应抛出异常。
有没有人有/知道/“能想到”一种有效测试它的方法?
最佳答案
这是之前在聊天中讨论的类的更新版本。它可以做你需要的,以及许多其他有用的事情。
<?php
class IPv4Subnet implements ArrayAccess, Iterator {
/*
* Address format constants
*/
const ADDRESS_BINARY = 0x01;
const ADDRESS_INT = 0x02;
const ADDRESS_DOTDEC = 0x04;
const ADDRESS_SUBNET = 0x08;
/*
* Constants to control whether getHosts() returns the network/broadcast addresses
*/
const HOSTS_WITH_NETWORK = 0x10;
const HOSTS_WITH_BROADCAST = 0x20;
const HOSTS_ALL = 0x30;
/*
* Properties to store base address and subnet mask as binary strings
*/
protected $address;
protected $mask;
/*
* Counter to track the current iteration offset
*/
private $iteratorOffset = 0;
/*
* Array to hold values retrieved via ArrayAccess
*/
private $arrayAccessObjects = array();
/*
* Helper methods
*/
private function longToBinary ($long) {
return pack('N', $long);
}
private function longToDottedDecimal ($long) {
return ($long >> 24 & 0xFF).'.'.($long >> 16 & 0xFF).'.'.($long >> 8 & 0xFF).'.'.($long & 0xFF);
}
private function longToByteArray ($long) {
return array(
$long >> 24 & 0xFF,
$long >> 16 & 0xFF,
$long >> 8 & 0xFF,
$long & 0xFF
);
}
private function longToSubnet ($long) {
if (!isset($this->arrayAccessObjects[$long])) {
$this->arrayAccessObjects[$long] = new self($long);
}
return $this->arrayAccessObjects[$long];
}
private function binaryToLong ($binary) {
return current(unpack('N', $binary));
}
private function binaryToDottedDecimal ($binary) {
return implode('.', unpack('C*', $binary));
}
private function binaryToX ($binary, $mode) {
if ($mode & self::ADDRESS_BINARY) {
$result = $binary;
} else if ($mode & self::ADDRESS_INT) {
$result = $this->binaryToLong($binary);
} else if ($mode & self::ADDRESS_DOTDEC) {
$result = $this->binaryToDottedDecimal($binary);
} else {
$result = $this->longToSubnet($this->binaryToLong($binary));
}
return $result;
}
private function byteArrayToLong($bytes) {
return ($bytes[0] << 24) | ($bytes[1] << 16) | ($bytes[2] << 8) | $bytes[3];
}
private function byteArrayToBinary($bytes) {
return pack('C*', $bytes[0], $bytes[1], $bytes[2], $bytes[3]);
}
private function normaliseComparisonSubject (&$subject) {
if (!is_object($subject)) {
$subject = new self($subject);
}
if (!($subject instanceof self)) {
throw new InvalidArgumentException('Subject must be an instance of IPv4Subnet');
}
}
private function validateOctetArray (&$octets) {
foreach ($octets as &$octet) {
$octet = (int) $octet;
if ($octet < 0 || $octet > 255) {
return FALSE;
}
}
return TRUE;
}
/*
* Constructor
*/
public function __construct ($address = NULL, $mask = NULL) {
if ($address === NULL || (is_string($address) && trim($address) === '')) {
$address = array(0, 0, 0, 0);
} else if (is_int($address)) {
$address = $this->longToByteArray($address);
} else if (is_string($address)) {
$parts = preg_split('#\s*/\s*#', trim($address), -1, PREG_SPLIT_NO_EMPTY);
if (count($parts) > 2) {
throw new InvalidArgumentException('No usable IP address supplied: Syntax error');
} else if ($parts[0] === '') {
throw new InvalidArgumentException('No usable IP address supplied: IP address empty');
}
if (!empty($parts[1]) && !isset($mask)) {
$mask = $parts[1];
}
$address = preg_split('#\s*\.\s*#', $parts[0], -1, PREG_SPLIT_NO_EMPTY);
} else if (is_array($address)) {
$address = array_values($address);
} else {
throw new InvalidArgumentException('No usable IP address supplied: Value must be a string or an integer');
}
$suppliedAddressOctets = count($address);
$address += array(0, 0, 0, 0);
if ($suppliedAddressOctets > 4) {
throw new InvalidArgumentException('No usable IP address supplied: IP address has more than 4 octets');
} else if (!$this->validateOctetArray($address)) {
throw new InvalidArgumentException('No usable IP address supplied: At least one octet value outside acceptable range 0 - 255');
}
if ($mask === NULL) {
$mask = array_pad(array(), $suppliedAddressOctets, 255) + array(0, 0, 0, 0);
} else if (is_int($mask)) {
$mask = $this->longToByteArray($mask);
} else if (is_string($mask)) {
$mask = preg_split('#\s*\.\s*#', trim($mask), -1, PREG_SPLIT_NO_EMPTY);
switch (count($mask)) {
case 1: // CIDR
$cidr = (int) $mask[0];
if ($cidr === 0) {
// Shifting 32 bits on a 32 bit system doesn't work, so treat this as a special case
$mask = array(0, 0, 0, 0);
} else if ($cidr <= 32) {
// This looks odd, but it's the nicest way I have found to get the 32 least significant bits set in a
// way that works on both 32 and 64 bit platforms
$base = ~((~0 << 16) << 16);
$mask = $this->longToByteArray($base << (32 - $cidr));
} else {
throw new InvalidArgumentException('Supplied mask invalid: CIDR outside acceptable range 0 - 32');
}
break;
case 4: break; // Dotted decimal
default: throw new InvalidArgumentException('Supplied mask invalid: Must be either a full dotted-decimal or a CIDR');
}
} else if (is_array($mask)) {
$mask = array_values($mask);
} else {
throw new InvalidArgumentException('Supplied mask invalid: Type invalid');
}
if (!$this->validateOctetArray($mask)) {
throw new InvalidArgumentException('Supplied mask invalid: At least one octet value outside acceptable range 0 - 255');
}
// Check bits are contiguous from left
// TODO: Improve this mechanism
$asciiBits = sprintf('%032b', $this->byteArrayToLong($mask));
if (strpos(rtrim($asciiBits, '0'), '0') !== FALSE) {
throw new InvalidArgumentException('Supplied mask invalid: Set bits are not contiguous from the most significant bit');
}
$this->mask = $this->byteArrayToBinary($mask);
$this->address = $this->byteArrayToBinary($address) & $this->mask;
}
/*
* ArrayAccess interface methods (read only)
*/
public function offsetExists ($offset) {
if ($offset === 'network' || $offset === 'broadcast') {
return TRUE;
}
$offset = filter_var($offset, FILTER_VALIDATE_INT);
if ($offset === FALSE || $offset < 0) {
return FALSE;
}
return $offset < $this->getHostsCount();
}
public function offsetGet ($offset) {
if (!$this->offsetExists($offset)) {
return NULL;
}
if ($offset === 'network') {
$address = $this->getNetworkAddress(self::ADDRESS_INT);
} else if ($offset === 'broadcast') {
$address = $this->getBroadcastAddress(self::ADDRESS_INT);
} else {
// How much the address needs to be adjusted by to account for network address
$adjustment = (int) ($this->getHostsCount() > 2);
$address = $this->binaryToLong($this->address) + $offset + $adjustment;
}
return $this->longToSubnet($address);
}
public function offsetSet ($offset, $value) {}
public function offsetUnset ($offset) {}
/*
* Iterator interface methods
*/
public function current () {
return $this->offsetGet($this->iteratorOffset);
}
public function key () {
return $this->iteratorOffset;
}
public function next () {
$this->iteratorOffset++;
}
public function rewind () {
$this->iteratorOffset = 0;
}
public function valid () {
return $this->iteratorOffset < $this->getHostsCount();
}
/*
* Data access methods
*/
public function getHosts ($mode = self::ADDRESS_SUBNET) {
// Parse flags and initialise vars
$bin = (bool) ($mode & self::ADDRESS_BINARY);
$int = (bool) ($mode & self::ADDRESS_INT);
$dd = (bool) ($mode & self::ADDRESS_DOTDEC);
$base = $this->binaryToLong($this->address);
$mask = $this->binaryToLong($this->mask);
$hasNwBc = !($mask & 0x03);
$result = array();
// Get network address if requested
if (($mode & self::HOSTS_WITH_NETWORK) && $hasNwBc) {
$result[] = $base;
}
// Get hosts
for ($current = $hasNwBc ? $base + 1 : $base; ($current & $mask) === $base; $current++) {
$result[] = $current;
}
// Remove broadcast address if present and not requested
if ($hasNwBc && !($mode & self::HOSTS_WITH_BROADCAST)) {
array_pop($result);
}
// Convert to the correct type
if ($bin) {
$result = array_map(array($this, 'longToBinary'), $result);
} else if ($dd) {
$result = array_map(array($this, 'longToDottedDecimal'), $result);
} else if (!$int) {
$result = array_map(array($this, 'longToSubnet'), $result);
}
return $result;
}
public function getHostsCount () {
$count = $this->getBroadcastAddress(self::ADDRESS_INT) - $this->getNetworkAddress(self::ADDRESS_INT);
return $count > 2 ? $count - 1 : $count + 1; // Adjust return value to exclude network/broadcast addresses
}
public function getNetworkAddress ($mode = self::ADDRESS_SUBNET) {
return $this->binaryToX($this->address, $mode);
}
public function getBroadcastAddress ($mode = self::ADDRESS_SUBNET) {
return $this->binaryToX($this->address | ~$this->mask, $mode);
}
public function getMask ($mode = self::ADDRESS_DOTDEC) {
return $this->binaryToX($this->mask, $mode);
}
/*
* Stringify methods
*/
public function __toString () {
if ($this->getHostsCount() === 1) {
$result = $this->toDottedDecimal();
} else {
$result = $this->toCIDR();
}
return $result;
}
public function toDottedDecimal () {
$result = $this->getNetworkAddress(self::ADDRESS_DOTDEC);
if ($this->mask !== "\xFF\xFF\xFF\xFF") {
$result .= '/'.$this->getMask(self::ADDRESS_DOTDEC);
}
return $result;
}
public function toCIDR () {
$address = $this->getNetworkAddress(self::ADDRESS_DOTDEC);
$cidr = strlen(trim(sprintf('%b', $this->getMask(self::ADDRESS_INT)), '0')); // TODO: Improve this mechanism
return $address.'/'.$cidr;
}
/*
* Comparison methods
*/
public function contains ($subject) {
$this->normaliseComparisonSubject($subject);
$subjectAddress = $subject->getNetworkAddress(self::ADDRESS_BINARY);
$subjectMask = $subject->getMask(self::ADDRESS_BINARY);
return $this->mask !== $subjectMask && ($this->mask | ($this->mask ^ $subjectMask)) !== $this->mask && ($subjectAddress & $this->mask) === $this->address;
}
public function within ($subject) {
$this->normaliseComparisonSubject($subject);
$subjectAddress = $subject->getNetworkAddress(self::ADDRESS_BINARY);
$subjectMask = $subject->getMask(self::ADDRESS_BINARY);
return $this->mask !== $subjectMask && ($this->mask | ($this->mask ^ $subjectMask)) === $this->mask && ($this->address & $subjectMask) === $subjectAddress;
}
public function equalTo ($subject) {
$this->normaliseComparisonSubject($subject);
return $this->address === $subject->getNetworkAddress(self::ADDRESS_BINARY) && $this->mask === $subject->getMask(self::ADDRESS_BINARY);
}
public function intersect ($subject) {
$this->normaliseComparisonSubject($subject);
return $this->equalTo($subject) || $this->contains($subject) || $this->within($subject);
}
}
为了做你想做的事,这个类提供了4个方法:
contains()
within()
equalTo()
intersect()
这些的示例用法:
// Also accepts dotted decimal mask. The mask may also be passed to the second
// argument. Any valid combination of dotted decimal, CIDR and integers will be
// accepted
$subnet = new IPv4Subnet('192.168.0.0/24');
// These methods will accept a string or another instance
var_dump($subnet->contains('192.168.0.1')); //TRUE
var_dump($subnet->contains('192.168.1.1')); //FALSE
var_dump($subnet->contains('192.168.0.0/16')); //FALSE
var_dump($subnet->within('192.168.0.0/16')); //TRUE
// ...hopefully you get the picture. intersect() returns TRUE if any of the
// other three match.
该类还实现了Iterator 接口(interface),允许您迭代子网中的所有地址。迭代器排除了可以单独检索的网络和广播地址。
例子:
$subnet = new IPv4Subnet('192.168.0.0/28');
echo "Network: ", $subnet->getNetworkAddress(),
"; Broadcast: ", $subnet->getBroadcastAddress(),
"\nHosts:\n";
foreach ($subnet as $host) {
echo $host, "\n";
}
该类还实现了 ArrayAccess,允许您将其视为数组:
$subnet = new IPv4Subnet('192.168.0.0/28');
echo $subnet['network'], "\n"; // 192.168.0.0
echo $subnet[0], "\n"; // 192.168.0.1
// ...
echo $subnet[13], "\n"; // 192.168.0.14
echo $subnet['broadcast'], "\n"; // 192.168.0.15
注意:访问子网主机地址的迭代器/数组方法将返回另一个 IPv4Subnet 对象。该类实现了 __toString(),如果它表示单个地址,它将以点分十进制形式返回 IP 地址,如果它表示多个地址,则返回 CIDR。通过调用相关的 get*() 方法并传递所需的标志(请参阅类顶部定义的常量),可以将数据作为字符串或整数直接访问。
所有操作都是 32 位和 64 位安全的。兼容性应该是(虽然没有彻底测试)5.2+
为了完整起见,我想您的用例将按照以下方式实现:
public function addSubnet ($newSubnet) {
$newSubnet = new IPv4Subnet($newSubnet);
foreach ($this->subnets as &$existingSubnet) {
if ($existingSubnet->contains($newSubnet)) {
throw new Exception('Subnet already added');
} else if ($existingSubnet->within($newSubnet)) {
$existingSubnet = $newSubnet;
return;
}
}
$this->subnets[] = $newSubnet;
}
关于php - 测试 cidr 表示法中的网络是否与另一个网络重叠,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/13608394/
总的来说,我对ruby还比较陌生,我正在为我正在创建的对象编写一些rspec测试用例。许多测试用例都非常基础,我只是想确保正确填充和返回值。我想知道是否有办法使用循环结构来执行此操作。不必为我要测试的每个方法都设置一个assertEquals。例如:describeitem,"TestingtheItem"doit"willhaveanullvaluetostart"doitem=Item.new#HereIcoulddotheitem.name.shouldbe_nil#thenIcoulddoitem.category.shouldbe_nilendend但我想要一些方法来使用
很好奇,就使用rubyonrails自动化单元测试而言,你们正在做什么?您是否创建了一个脚本来在cron中运行rake作业并将结果邮寄给您?git中的预提交Hook?只是手动调用?我完全理解测试,但想知道在错误发生之前捕获错误的最佳实践是什么。让我们理所当然地认为测试本身是完美无缺的,并且可以正常工作。下一步是什么以确保他们在正确的时间将可能有害的结果传达给您? 最佳答案 不确定您到底想听什么,但是有几个级别的自动代码库控制:在处理某项功能时,您可以使用类似autotest的内容获得关于哪些有效,哪些无效的即时反馈。要确保您的提
我试图在一个项目中使用rake,如果我把所有东西都放到Rakefile中,它会很大并且很难读取/找到东西,所以我试着将每个命名空间放在lib/rake中它自己的文件中,我添加了这个到我的rake文件的顶部:Dir['#{File.dirname(__FILE__)}/lib/rake/*.rake'].map{|f|requiref}它加载文件没问题,但没有任务。我现在只有一个.rake文件作为测试,名为“servers.rake”,它看起来像这样:namespace:serverdotask:testdoputs"test"endend所以当我运行rakeserver:testid时
作为我的Rails应用程序的一部分,我编写了一个小导入程序,它从我们的LDAP系统中吸取数据并将其塞入一个用户表中。不幸的是,与LDAP相关的代码在遍历我们的32K用户时泄漏了大量内存,我一直无法弄清楚如何解决这个问题。这个问题似乎在某种程度上与LDAP库有关,因为当我删除对LDAP内容的调用时,内存使用情况会很好地稳定下来。此外,不断增加的对象是Net::BER::BerIdentifiedString和Net::BER::BerIdentifiedArray,它们都是LDAP库的一部分。当我运行导入时,内存使用量最终达到超过1GB的峰值。如果问题存在,我需要找到一些方法来更正我的代
Rails2.3可以选择随时使用RouteSet#add_configuration_file添加更多路由。是否可以在Rails3项目中做同样的事情? 最佳答案 在config/application.rb中:config.paths.config.routes在Rails3.2(也可能是Rails3.1)中,使用:config.paths["config/routes"] 关于ruby-on-rails-Rails3中的多个路由文件,我们在StackOverflow上找到一个类似的问题
给定这段代码defcreate@upgrades=User.update_all(["role=?","upgraded"],:id=>params[:upgrade])redirect_toadmin_upgrades_path,:notice=>"Successfullyupgradeduser."end我如何在该操作中实际验证它们是否已保存或未重定向到适当的页面和消息? 最佳答案 在Rails3中,update_all不返回任何有意义的信息,除了已更新的记录数(这可能取决于您的DBMS是否返回该信息)。http://ar.ru
使用带有Rails插件的vim,您可以创建一个迁移文件,然后一次性打开该文件吗?textmate也可以这样吗? 最佳答案 你可以使用rails.vim然后做类似的事情::Rgeneratemigratonadd_foo_to_bar插件将打开迁移生成的文件,这正是您想要的。我不能代表textmate。 关于ruby-使用VimRails,您可以创建一个新的迁移文件并一次性打开它吗?,我们在StackOverflow上找到一个类似的问题: https://sta
我需要从一个View访问多个模型。以前,我的links_controller仅用于提供以不同方式排序的链接资源。现在我想包括一个部分(我假设)显示按分数排序的顶级用户(@users=User.all.sort_by(&:score))我知道我可以将此代码插入每个链接操作并从View访问它,但这似乎不是“ruby方式”,我将需要在不久的将来访问更多模型。这可能会变得很脏,是否有针对这种情况的任何技术?注意事项:我认为我的应用程序正朝着单一格式和动态页面内容的方向发展,本质上是一个典型的网络应用程序。我知道before_filter但考虑到我希望应用程序进入的方向,这似乎很麻烦。最终从任何
我想要做的是有2个不同的Controller,client和test_client。客户端Controller已经构建,我想创建一个test_clientController,我可以使用它来玩弄客户端的UI并根据需要进行调整。我主要是想绕过我在客户端中内置的验证及其对加载数据的管理Controller的依赖。所以我希望test_clientController加载示例数据集,然后呈现客户端Controller的索引View,以便我可以调整客户端UI。就是这样。我在test_clients索引方法中试过这个:classTestClientdefindexrender:template=>
我在我的项目中添加了一个系统来重置用户密码并通过电子邮件将密码发送给他,以防他忘记密码。昨天它运行良好(当我实现它时)。当我今天尝试启动服务器时,出现以下错误。=>BootingWEBrick=>Rails3.2.1applicationstartingindevelopmentonhttp://0.0.0.0:3000=>Callwith-dtodetach=>Ctrl-CtoshutdownserverExiting/Users/vinayshenoy/.rvm/gems/ruby-1.9.3-p0/gems/actionmailer-3.2.1/lib/action_mailer