最近和其它系统联调接口,用到了Java的AES加解密。
由其它系统AES加密,本人的系统获取到加密报文后,AES解密,获取到内容。
本来是比较简单的,可是其它系统只提供了秘钥,没有提供解密方法,解密方法需要我们自己写……
正常应该是加密方提供解密方法的吧,我觉得……
结果,只能自己找解密方法,解密过程中就报了2个错:
java.security.InvalidKeyException: Invalid AES key length: 14 bytes
javax.crypto.BadPaddingException: Given final block not properly padded
还好最后都解决了,在此记录下。
1.出现这个错误,是秘钥长度不符合要求导致的。
例如,本人系统的代码如下:
/**
* 算法名称/加密模式/数据填充方式
*/
private static final String ALGORITHMSTR = "AES/ECB/PKCS5Padding";
/**
* AES加解密密钥(一般长度是16,但是其它系统给了个长度是14的秘钥)
*/
private static final String KEY = "1234567890abcd";
/**
* AES
*/
private static final String AES = "AES";
/**
* 解密方法
*/
public static String decrypt(String encryptStr) {
try {
Cipher cipher = Cipher.getInstance(ALGORITHMSTR);
//这里用的秘钥KEY就是 1234567890abcd,然后就报错了:Invalid AES key length: 14 bytes
cipher.init(Cipher.DECRYPT_MODE, new SecretKeySpec(KEY.getBytes(), AES));
//采用base64算法进行转码,避免出现中文乱码
byte[] encryptBytes = Base64.decodeBase64(encryptStr);
byte[] decryptBytes = cipher.doFinal(encryptBytes);
return new String(decryptBytes);
}catch (Exception e){
log.error("decrypt({} , {})解密异常", encryptStr, decryptKey, e);
}
return null;
}
这段会报错:cipher.init(Cipher.DECRYPT_MODE, new SecretKeySpec(KEY.getBytes(), AES));
因为KEY的值是1234567890abcd,长度是14,所以报错:
java.security.InvalidKeyException: Invalid AES key length: 14 bytes
如果把秘钥改为1234567890abcdef,长度16,就没有问题了;
但是对面系统说他们就是用的长度14的秘钥加密的,所以不能这样解决。
2.虽然对面系统没有给解密方法,但是还好加密方法给截图发过来了。
分析了一波,发现对面系统先对秘钥进行了处理,转为了16位的,然后才加密;
所以解密方法需要这样写:
/**
* AES解密方法;秘钥长度是14,用secureRandom换成了16*8=128的秘钥
*/
public static String decryptTxx(String decryptStr) {
try {
KeyGenerator kgen = KeyGenerator.getInstance(AES);
SecureRandom secureRandom = SecureRandom.getInstance("SHA1PRNG");
//这里,KEY="1234567890abcd",长度14
secureRandom.setSeed(KEY.getBytes());
kgen.init(128, secureRandom);
SecretKey secretKey = kgen.generateKey();
Cipher cipher = Cipher.getInstance(ALGORITHMSTR);
//这里,用转换后的秘钥,就没有问题了
cipher.init(Cipher.DECRYPT_MODE, new SecretKeySpec(secretKey.getEncoded(), AES));
//采用base64算法进行转码,避免出现中文乱码
byte[] encryptBytes = Base64.decodeBase64(decryptStr);
byte[] decryptBytes = cipher.doFinal(encryptBytes);
return new String(decryptBytes);
}catch (Exception e){
log.error("decryptTxx({} , {})解密异常", decryptStr, decryptKey, e);
}
return null;
}
这样,用SecureRandom把长度14的秘钥转为了长度16的,然后解密,就没有问题了。
报这个错误,可能是秘钥错误、解密失败导致的。
如上,使用秘钥1234567890abcdef解密、就会报这个错误;
需要使用秘钥1234567890abcd解密才行。
1.报错Invalid AES key length: xx bytes,是秘钥长度不符合要求导致的(例如长度不是16),需要对秘钥进行转换,或者更换秘钥、使用符合长度的秘钥。
2.报错Given final block not properly padded,可能是秘钥错误、解密失败导致的,需要确认秘钥是否正确。
3.AES加解密完整代码如下:
import org.apache.commons.codec.binary.Base64;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import javax.crypto.Cipher;
import javax.crypto.KeyGenerator;
import javax.crypto.SecretKey;
import javax.crypto.spec.SecretKeySpec;
import java.security.SecureRandom;
/**
* AES加解密
*/
public class AesEncryptUtils {
private static Logger log = LoggerFactory.getLogger(AesEncryptUtils.class);
/**
* 算法名称/加密模式/数据填充方式
*/
private static final String ALGORITHMSTR = "AES/ECB/PKCS5Padding";
/**
* AES加解密默认密钥(16位,也可以用其它长度,那就用 New 方法 )
*/
private static final String KEY = "1234567890abcdef";
//private static final String KEY = "1234567890abcd";
/**
* AES
*/
private static final String AES = "AES";
/**
* 加密
* @param content 要加密的字符串
* @param encryptKey 加密的密钥
* @return
* @throws Exception
*/
public static String encrypt(String content, String encryptKey){
try {
KeyGenerator kgen = KeyGenerator.getInstance(AES);
kgen.init(128);
Cipher cipher = Cipher.getInstance(ALGORITHMSTR);
cipher.init(Cipher.ENCRYPT_MODE, new SecretKeySpec(encryptKey.getBytes(), AES));
byte[] b = cipher.doFinal(content.getBytes("utf-8"));
//采用base64算法进行转码,避免出现中文乱码
return Base64.encodeBase64String(b);
}catch (Exception e){
log.error("encrypt({} , {})加密异常", content, encryptKey, e);
}
return null;
}
/**
* 解密
* @param encryptStr 要解密的字符串
* @param decryptKey 要解密的密钥
* @return
* @throws Exception
*/
public static String decrypt(String encryptStr, String decryptKey) {
try {
Cipher cipher = Cipher.getInstance(ALGORITHMSTR);
cipher.init(Cipher.DECRYPT_MODE, new SecretKeySpec(KEY.getBytes(), AES));
//采用base64算法进行转码,避免出现中文乱码
byte[] encryptBytes = Base64.decodeBase64(encryptStr);
byte[] decryptBytes = cipher.doFinal(encryptBytes);
return new String(decryptBytes);
}catch (Exception e){
log.error("decrypt({} , {})解密异常", encryptStr, decryptKey, e);
}
return null;
}
/**
* AES解密方法;数据库里秘钥长度是14,用secureRandom换成了16*8=128的秘钥
*/
public static String decryptNew(String decryptStr, String decryptKey) {
try {
KeyGenerator kgen = KeyGenerator.getInstance(AES);
SecureRandom secureRandom = SecureRandom.getInstance("SHA1PRNG");
secureRandom.setSeed(decryptKey.getBytes());
kgen.init(128, secureRandom);
SecretKey secretKey = kgen.generateKey();
Cipher cipher = Cipher.getInstance(ALGORITHMSTR);
cipher.init(Cipher.DECRYPT_MODE, new SecretKeySpec(secretKey.getEncoded(), AES));
//采用base64算法进行转码,避免出现中文乱码
byte[] encryptBytes = Base64.decodeBase64(decryptStr);
byte[] decryptBytes = cipher.doFinal(encryptBytes);
return new String(decryptBytes);
}catch (Exception e){
log.error("decryptNew({} , {})解密异常", decryptStr, decryptKey, e);
}
return null;
}
public static String encryptNew(String encryptStr, String encryptKey) {
try {
KeyGenerator kgen = KeyGenerator.getInstance(AES);
SecureRandom secureRandom = SecureRandom.getInstance("SHA1PRNG");
secureRandom.setSeed(encryptKey.getBytes());
kgen.init(128,secureRandom);
SecretKey secretKey = kgen.generateKey();
Cipher cipher = Cipher.getInstance(ALGORITHMSTR);
cipher.init(Cipher.ENCRYPT_MODE, new SecretKeySpec(secretKey.getEncoded(), AES));
byte[] b = cipher.doFinal(encryptStr.getBytes("utf-8"));
//采用base64算法进行转码,避免出现中文乱码
return Base64.encodeBase64String(b);
}catch (Exception e){
log.error("encryptNew({} , {})加密异常", encryptStr, encryptKey, e);
}
return null;
}
public static void main (String[] args) throws Exception{
String str = "123";
String encrypt = encrypt(str , KEY);
System.out.println("加密后:" + encrypt);
String decrypt = decrypt(encrypt , KEY);
System.out.println("解密后:" + decrypt);
String encrypt1 = encryptNew(str , KEY);
System.out.println("加密后:" + encrypt1);
String decrypt1 = decryptNew(encrypt1 , KEY);
System.out.println("解密后:" + decrypt1);
}
}
我正在学习如何使用Nokogiri,根据这段代码我遇到了一些问题:require'rubygems'require'mechanize'post_agent=WWW::Mechanize.newpost_page=post_agent.get('http://www.vbulletin.org/forum/showthread.php?t=230708')puts"\nabsolutepathwithtbodygivesnil"putspost_page.parser.xpath('/html/body/div/div/div/div/div/table/tbody/tr/td/div
总的来说,我对ruby还比较陌生,我正在为我正在创建的对象编写一些rspec测试用例。许多测试用例都非常基础,我只是想确保正确填充和返回值。我想知道是否有办法使用循环结构来执行此操作。不必为我要测试的每个方法都设置一个assertEquals。例如:describeitem,"TestingtheItem"doit"willhaveanullvaluetostart"doitem=Item.new#HereIcoulddotheitem.name.shouldbe_nil#thenIcoulddoitem.category.shouldbe_nilendend但我想要一些方法来使用
类classAprivatedeffooputs:fooendpublicdefbarputs:barendprivatedefzimputs:zimendprotecteddefdibputs:dibendendA的实例a=A.new测试a.foorescueputs:faila.barrescueputs:faila.zimrescueputs:faila.dibrescueputs:faila.gazrescueputs:fail测试输出failbarfailfailfail.发送测试[:foo,:bar,:zim,:dib,:gaz].each{|m|a.send(m)resc
我正在尝试设置一个puppet节点,但rubygems似乎不正常。如果我通过它自己的二进制文件(/usr/lib/ruby/gems/1.8/gems/facter-1.5.8/bin/facter)在cli上运行facter,它工作正常,但如果我通过由rubygems(/usr/bin/facter)安装的二进制文件,它抛出:/usr/lib/ruby/1.8/facter/uptime.rb:11:undefinedmethod`get_uptime'forFacter::Util::Uptime:Module(NoMethodError)from/usr/lib/ruby
我想了解Ruby方法methods()是如何工作的。我尝试使用“ruby方法”在Google上搜索,但这不是我需要的。我也看过ruby-doc.org,但我没有找到这种方法。你能详细解释一下它是如何工作的或者给我一个链接吗?更新我用methods()方法做了实验,得到了这样的结果:'labrat'代码classFirstdeffirst_instance_mymethodenddefself.first_class_mymethodendendclassSecond使用类#returnsavailablemethodslistforclassandancestorsputsSeco
我在我的项目中添加了一个系统来重置用户密码并通过电子邮件将密码发送给他,以防他忘记密码。昨天它运行良好(当我实现它时)。当我今天尝试启动服务器时,出现以下错误。=>BootingWEBrick=>Rails3.2.1applicationstartingindevelopmentonhttp://0.0.0.0:3000=>Callwith-dtodetach=>Ctrl-CtoshutdownserverExiting/Users/vinayshenoy/.rvm/gems/ruby-1.9.3-p0/gems/actionmailer-3.2.1/lib/action_mailer
设置:狂欢ruby1.9.2高线(1.6.13)描述:我已经相当习惯在其他一些项目中使用highline,但已经有几个月没有使用它了。现在,在Ruby1.9.2上全新安装时,它似乎不允许在同一行回答提示。所以以前我会看到类似的东西:require"highline/import"ask"Whatisyourfavoritecolor?"并得到:Whatisyourfavoritecolor?|现在我看到类似的东西:Whatisyourfavoritecolor?|竖线(|)符号是我的终端光标。知道为什么会发生这种变化吗? 最佳答案
我已经从我的命令行中获得了一切,所以我可以运行rubymyfile并且它可以正常工作。但是当我尝试从sublime中运行它时,我得到了undefinedmethod`require_relative'formain:Object有人知道我的sublime设置中缺少什么吗?我正在使用OSX并安装了rvm。 最佳答案 或者,您可以只使用“require”,它应该可以正常工作。我认为“require_relative”仅适用于ruby1.9+ 关于ruby-主要:Objectwhenrun
我有一个具有一些属性的模型:attr1、attr2和attr3。我需要在不执行回调和验证的情况下更新此属性。我找到了update_column方法,但我想同时更新三个属性。我需要这样的东西:update_columns({attr1:val1,attr2:val2,attr3:val3})代替update_column(attr1,val1)update_column(attr2,val2)update_column(attr3,val3) 最佳答案 您可以使用update_columns(attr1:val1,attr2:val2
我不确定传递给方法的对象的类型是否正确。我可能会将一个字符串传递给一个只能处理整数的函数。某种运行时保证怎么样?我看不到比以下更好的选择:defsomeFixNumMangler(input)raise"wrongtype:integerrequired"unlessinput.class==FixNumother_stuffend有更好的选择吗? 最佳答案 使用Kernel#Integer在使用之前转换输入的方法。当无法以任何合理的方式将输入转换为整数时,它将引发ArgumentError。defmy_method(number)