我们在 iOS7 中遇到了 MKMapView 的区域问题。
在我们的应用程序启动并且设备更改了几次 UI 方向后,map.region 返回的值变得非常奇怪。它们往往有一个合理的经度跨度但一个小的纬度跨度,反之亦然,就好像 map 的印象是它的边界已经沿着屏幕的一个边缘被切割成一个狭窄的矩形。发生这种情况后,MKMapView 的实际边界和框架仍然有意义。
通过根据 map 的实际边界计算我们自己的区域,可以解决由此导致的一些问题,但我们仍有一些问题无法解决。例如,当点击注释以显示其标注时, map 有时会平移以将标注移动到它认为它占据的屏幕的一小部分。
有没有其他人遇到过这个问题?
我们的 shim 来实现解决方法如下,以防它们有用:
+(void)setMap: (MKMapView*) map region:(MKCoordinateRegion) region
{
CGRect realBounds = map.bounds;
MKCoordinateRegion claimedRegion = map.region; // the map's claimed region, which is wonkily different after a rotate in ios7
CGRect claimedBounds = [map convertRegion:claimedRegion toRectToView:map]; // the bounds which the map thinks its region occupies
// if we want region to map to realBounds, but the map thinks it is only claimedBounds big, what
// reduced region will map to claimedBounds ?
MKCoordinateRegion reducedRegion = [Utilities sliceRegion: region inBounds: realBounds toReducedBounds: claimedBounds];
[map setRegion:reducedRegion animated:YES];
}
+ (MKCoordinateRegion) sliceRegion: (MKCoordinateRegion) bigRegion inBounds: (CGRect) wholeBounds toReducedBounds: (CGRect) reducedBounds
{
MKCoordinateRegion reducedRegion;
// Coords of our region's corners in lat/long
CLLocationDegrees left = bigRegion.center.longitude - bigRegion.span.longitudeDelta/2.0;
CLLocationDegrees right = bigRegion.center.longitude + bigRegion.span.longitudeDelta/2.0;
CLLocationDegrees top = bigRegion.center.latitude + bigRegion.span.latitudeDelta/2.0;
CLLocationDegrees bottom = bigRegion.center.latitude - bigRegion.span.latitudeDelta/2.0;
// Coords of our bounds in pixels
CGFloat wholeLeft = wholeBounds.origin.x;
CGFloat wholeRight = wholeBounds.origin.x + wholeBounds.size.width;
CGFloat wholeTop = wholeBounds.origin.y;
CGFloat wholeBottom = wholeBounds.origin.y + wholeBounds.size.height;
// Coords of the smaller bounds in pixels
CGFloat reducedLeft = reducedBounds.origin.x;
CGFloat reducedRight = reducedBounds.origin.x + reducedBounds.size.width;
CGFloat reducedTop = reducedBounds.origin.y;
CGFloat reducedBottom = reducedBounds.origin.y + reducedBounds.size.height;
// Now work out what the lat & long values for the corners of the reduced bounds are
CLLocationDegrees newLeft = left + (right-left) * (reducedLeft - wholeLeft) / (wholeRight - wholeLeft);
CLLocationDegrees newRight = left + (right-left) * (reducedRight - wholeLeft) / (wholeRight - wholeLeft);
CLLocationDegrees newTop = top + (bottom - top) * (reducedTop - wholeTop) / (wholeBottom - wholeTop);
CLLocationDegrees newBottom = top + (bottom - top) * (reducedBottom - wholeTop) / (wholeBottom - wholeTop);
reducedRegion.center.longitude = (newRight + newLeft) / 2.0;
reducedRegion.center.latitude = (newBottom + newTop) / 2.0;
reducedRegion.span.longitudeDelta = newRight - newLeft;
reducedRegion.span.latitudeDelta = newTop - newBottom;
return reducedRegion;
}
+(MKCoordinateRegion)getMapRegion: (MKMapView*) map
{
CGRect bounds = map.bounds;
MKCoordinateRegion region = [map convertRect:bounds toRegionFromView:map]; // the region we can see on the screen, not the map's wonky region!
if ((region.span.latitudeDelta < 0.0) || (region.span.longitudeDelta < 0.0) || region.span.longitudeDelta / region.span.latitudeDelta > 5.0 || region.span.latitudeDelta / region.span.longitudeDelta > 5.0 )
{
LogD(@"getMap: region: bad span - lat: %f, long: %f", region.span.latitudeDelta, region.span.longitudeDelta);
}
return region;
}
+(void)setMap: (MKMapView*) map center: (CLLocationCoordinate2D) center
{
CGRect bounds = map.bounds;
MKCoordinateRegion boundsRegion = [map convertRect:bounds toRegionFromView:map]; // the region we can see on the screen
MKCoordinateRegion claimedRegion = map.region; // the map's claimed region, which is wonkily different after a rotate in ios7
CLLocationCoordinate2D offsetCenter; // make up a value to tell the map to center on which will make it really center
offsetCenter.latitude = center.latitude - ( boundsRegion.center.latitude - claimedRegion.center.latitude );
offsetCenter.longitude = center.longitude - ( boundsRegion.center.longitude - claimedRegion.center.longitude );
[map setCenterCoordinate:offsetCenter animated:YES];
}
+(CLLocationCoordinate2D)getMapCenter: (MKMapView*) map
{
CGRect bounds = map.bounds;
MKCoordinateRegion boundsRegion = [map convertRect:bounds toRegionFromView:map]; // the region we can see on the screen
return boundsRegion.center;
}
最佳答案
当我在 iOS 7 上的 LandscapeRight 中设置 map 区域时,一切正常。
当我将设备旋转到 LandscapeLeft 并加载同一区域时, map 会大量移动并缩放到很远的地方。缩放级别需要乘以 100 才能解决问题,即。 50000 变成 5000000 & 我需要从 lat 中减去 23 & 将 3 添加到 lon 即。 (41.0, 29.0) 变为 (18.0, 32.0)。
经过一些测试后,我能够像这样解决 iOS 7 和 iOS 6 的问题(请原谅 iOS 版本检查它的快速和肮脏)
if([[[UIDevice currentDevice] systemVersion] rangeOfString:@"7."].location != NSNotFound){
if(self.interfaceOrientation == UIInterfaceOrientationLandscapeLeft){
CLLocationCoordinate2D startCoord = CLLocationCoordinate2DMake(41.0, 29.0);
[_mapView setRegion:MKCoordinateRegionMakeWithDistance(startCoord, 5000000.0, 5000000.0) animated:NO];
}else if(self.interfaceOrientation == UIInterfaceOrientationLandscapeRight){
CLLocationCoordinate2D startCoord = CLLocationCoordinate2DMake(18.0, 32.0);
[_mapView setRegion:MKCoordinateRegionMakeWithDistance(startCoord, 50000.0, 50000.0) animated:NO];
}
}else{
MKCoordinateRegion region;
region.center.latitude = topLeftCoord.latitude - (topLeftCoord.latitude - bottomRightCoord.latitude) * 0.3;
region.center.longitude = topLeftCoord.longitude + (bottomRightCoord.longitude - topLeftCoord.longitude) * 0.7;
region.span.latitudeDelta = fabs(topLeftCoord.latitude - bottomRightCoord.latitude) * span; // Add a little extra space on the sides
region.span.longitudeDelta = fabs(bottomRightCoord.longitude - topLeftCoord.longitude) * span; // Add a little extra space on the sides
region = [_mapView regionThatFits:region];
[_mapView setRegion:region animated:NO];
}
关于ios - MKMapView 区域在 iOS7 中的方向更改后变得 splinter ,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/19009341/
总的来说,我对ruby还比较陌生,我正在为我正在创建的对象编写一些rspec测试用例。许多测试用例都非常基础,我只是想确保正确填充和返回值。我想知道是否有办法使用循环结构来执行此操作。不必为我要测试的每个方法都设置一个assertEquals。例如:describeitem,"TestingtheItem"doit"willhaveanullvaluetostart"doitem=Item.new#HereIcoulddotheitem.name.shouldbe_nil#thenIcoulddoitem.category.shouldbe_nilendend但我想要一些方法来使用
我试图在一个项目中使用rake,如果我把所有东西都放到Rakefile中,它会很大并且很难读取/找到东西,所以我试着将每个命名空间放在lib/rake中它自己的文件中,我添加了这个到我的rake文件的顶部:Dir['#{File.dirname(__FILE__)}/lib/rake/*.rake'].map{|f|requiref}它加载文件没问题,但没有任务。我现在只有一个.rake文件作为测试,名为“servers.rake”,它看起来像这样:namespace:serverdotask:testdoputs"test"endend所以当我运行rakeserver:testid时
作为我的Rails应用程序的一部分,我编写了一个小导入程序,它从我们的LDAP系统中吸取数据并将其塞入一个用户表中。不幸的是,与LDAP相关的代码在遍历我们的32K用户时泄漏了大量内存,我一直无法弄清楚如何解决这个问题。这个问题似乎在某种程度上与LDAP库有关,因为当我删除对LDAP内容的调用时,内存使用情况会很好地稳定下来。此外,不断增加的对象是Net::BER::BerIdentifiedString和Net::BER::BerIdentifiedArray,它们都是LDAP库的一部分。当我运行导入时,内存使用量最终达到超过1GB的峰值。如果问题存在,我需要找到一些方法来更正我的代
Rails2.3可以选择随时使用RouteSet#add_configuration_file添加更多路由。是否可以在Rails3项目中做同样的事情? 最佳答案 在config/application.rb中:config.paths.config.routes在Rails3.2(也可能是Rails3.1)中,使用:config.paths["config/routes"] 关于ruby-on-rails-Rails3中的多个路由文件,我们在StackOverflow上找到一个类似的问题
我需要从一个View访问多个模型。以前,我的links_controller仅用于提供以不同方式排序的链接资源。现在我想包括一个部分(我假设)显示按分数排序的顶级用户(@users=User.all.sort_by(&:score))我知道我可以将此代码插入每个链接操作并从View访问它,但这似乎不是“ruby方式”,我将需要在不久的将来访问更多模型。这可能会变得很脏,是否有针对这种情况的任何技术?注意事项:我认为我的应用程序正朝着单一格式和动态页面内容的方向发展,本质上是一个典型的网络应用程序。我知道before_filter但考虑到我希望应用程序进入的方向,这似乎很麻烦。最终从任何
我在我的项目中添加了一个系统来重置用户密码并通过电子邮件将密码发送给他,以防他忘记密码。昨天它运行良好(当我实现它时)。当我今天尝试启动服务器时,出现以下错误。=>BootingWEBrick=>Rails3.2.1applicationstartingindevelopmentonhttp://0.0.0.0:3000=>Callwith-dtodetach=>Ctrl-CtoshutdownserverExiting/Users/vinayshenoy/.rvm/gems/ruby-1.9.3-p0/gems/actionmailer-3.2.1/lib/action_mailer
刚入门rails,开始慢慢理解。有人可以解释或给我一些关于在application_controller中编码的好处或时间和原因的想法吗?有哪些用例。您如何为Rails应用程序使用应用程序Controller?我不想在那里放太多代码,因为据我了解,每个请求都会调用此Controller。这是真的? 最佳答案 ApplicationController实际上是您应用程序中的每个其他Controller都将从中继承的类(尽管这不是强制性的)。我同意不要用太多代码弄乱它并保持干净整洁的态度,尽管在某些情况下ApplicationContr
我想向我的Controller传递一个参数,它是一个简单的复选框,但我不知道如何在模型的form_for中引入它,这是我的观点:{:id=>'go_finance'}do|f|%>Transferirde:para:Entrada:"input",:placeholder=>"Quantofoiganho?"%>Saída:"output",:placeholder=>"Quantofoigasto?"%>Nota:我想做一个额外的复选框,但我该怎么做,模型中没有一个对象,而是一个要检查的对象,以便在Controller中创建一个ifelse,如果没有检查,请帮助我,非常感谢,谢谢
我注意到像bundler这样的项目在每个specfile中执行requirespec_helper我还注意到rspec使用选项--require,它允许您在引导rspec时要求一个文件。您还可以将其添加到.rspec文件中,因此只要您运行不带参数的rspec就会添加它。使用上述方法有什么缺点可以解释为什么像bundler这样的项目选择在每个规范文件中都需要spec_helper吗? 最佳答案 我不在Bundler上工作,所以我不能直接谈论他们的做法。并非所有项目都checkin.rspec文件。原因是这个文件,通常按照当前的惯例,只
我正在使用active_admin,我在Rails3应用程序的应用程序中有一个目录管理,其中包含模型和页面的声明。时不时地我也有一个类,当那个类有一个常量时,就像这样:classFooBAR="bar"end然后,我在每个必须在我的Rails应用程序中重新加载一些代码的请求中收到此警告:/Users/pupeno/helloworld/app/admin/billing.rb:12:warning:alreadyinitializedconstantBAR知道发生了什么以及如何避免这些警告吗? 最佳答案 在纯Ruby中:classA