我尝试了 try: catch 但它不起作用。我想我可以将其更改为 if 语句，但不明白为什么这不起作用。这是我的第一个“真正的”项目。我正在构建灌溉 Controller 并创建灌溉时间表字典。第一个是我到目前为止的代码，第二个代码是我正在尝试的“测试”本身。每次我运行代码时，它都会重写现有文件，而我想要的是打开文件(如果文件已经存在)而不是再次写入。

# timer will first look for a saved file(dictionary) of already recorded
# irrigation times.  If no file exists it will create one.  

# irrigation timer which does scheduled irrigation as well as cyclic   irrigation for propagating plants.
# uses a lcd 1602 display
# will use up to 10 different valves

import time
import datetime
import threading
import RPi.GPIO as GPIO
from RPLCD import CharLCD # http://www.circuitbasics.com/raspberry-pi-lcd-set-up-and-programming-in-python/

GPIO.setmode(GPIO.BOARD)

# pinouts for lcd pins
lcd = CharLCD (cols=16, rows=2, pin_rs=37, pin_e=35, pins_data=[33, 31, 29, 23]) 

# valve pins
valve_1 = 8
valve_2 = 10
valve_3 = 12
valve_4 = 16
valve_5 = 18
valve_6 = 22
valve_7 = 24
valve_8 = 26
valve_9 = 32
valve_10 = 36

# setup valve pins as outputs
GPIO.setup(valve_pin1, GPIO.OUT)
GPIO.setup(valve_pin2, GPIO.OUT)
GPIO.setup(valve_pin3, GPIO.OUT)
GPIO.setup(valve_pin4, GPIO.OUT)
GPIO.setup(valve_pin5, GPIO.OUT)
GPIO.setup(valve_pin6, GPIO.OUT)
GPIO.setup(valve_pin7, GPIO.OUT)
GPIO.setup(valve_pin8, GPIO.OUT)
GPIO.setup(valve_pin9, GPIO.OUT)
GPIO.setup(valve_pin10, GPIO.OUT)

#set all valve pins to off
GPIO.output(valve_pin1, False)
GPIO.output(valve_pin2, False)
GPIO.output(valve_pin3, False)
GPIO.output(valve_pin4, False)
GPIO.output(valve_pin5, False)
GPIO.output(valve_pin6, False)
GPIO.output(valve_pin7, False)
GPIO.output(valve_pin8, False)
GPIO.output(valve_pin9, False)
GPIO.output(valve_pin10, False)

# check to see if a schedule has been saved
def sched_check()
    try:
        file = open("schedule.dat", "r")
        schedule = schedule.read()
        file.close()
    # create a list of schedule dictionaries
    except:
        schedule_list = []
        for schedule_number in range(10):
            schedule = {
                                        "timed" : {
                                                  "watering_days" : [],
                                                  "watering_times" : [],
                                                  "duration" : "timed_duration",
                                                  },
                                        "cyclic" : {
                                                  "time_on" : "seconds_on",
                                                  "time_off" : "seconds_off",
                                                  "blackout_window_start" : "blkout_time_start",
                                                  "blackout_window_stop" : "blkout_time_stop",
                                                   },
                                        }
            schedule_list.append(schedule)
        file = open("schedule.dat", "w")
        file.write(str(schedule_list))
        file.close()

这本身就是问题所在。

def sched_check():
    try:
        file = open("schedule.dat", "r")
        schedule = schedule.read()
        file.close()
        print("file already exists")
    # create a list of schedule dictionaries
    except:
        schedule_list = []
        for schedule_number in range(10):
            schedule = {
                                        "timed" : {
                                                  "watering_days" : [],
                                                  "watering_times" : [],
                                                  "duration" : "timed_duration",
                                                  },
                                        "cyclic" : {
                                                  "time_on" : "seconds_on",
                                                  "time_off" : "seconds_off",
                                                  "blackout_window_start" : "blkout_time_start",
                                                  "blackout_window_stop" : "blkout_time_stop",
                                                   },
                                        }
            schedule_list.append(schedule)
        file = open("schedule.dat", "w")
        file.write(str(schedule_list))
        file.close()
        print("new file created")

sched_check()