草庐IT

ios - 分段控制更改时更改 View Controller

coder 2023-07-28 原文

这个问题快把我逼疯了。当用户更改分段控件的选定“选项卡”时,我试图更改 viewController。我花了几个小时进行研究,但未能找到有效的答案或通过 Storyboard完成的答案。

这真的很困扰我,因为设置选项卡应用程序是如此简单,但是尝试像选项卡应用程序一样使用分段控件就是行不通。我已经知道如何检测在分段控件中选择了哪个索引。我怎样才能做到这一点?

非常感谢。

最佳答案

注意:答案更新为 iOS 5+ 的 View Controller 包含代码,包括 @interface 部分

在我的一个应用程序中,我在导航栏中有一个带有段控件的 View Controller ,单击“选项卡”切换 View Controller 。基本思想是拥有一个 View Controller 数组,并使用段索引(和 indexDidChangeForSegmentedControl IBAction)在它们之间切换。

我的应用程序中的示例代码(iOS 5 或更高版本)(这是针对 2 个 View Controller 的,但它很容易扩展到多个 View Controller );代码比 iOS 4 稍长,但会保持对象图的完整性。此外,它使用 ARC:

@interface MyViewController ()
// Segmented control to switch view controllers
@property (weak, nonatomic) IBOutlet UISegmentedControl *switchViewControllers;

// Array of view controllers to switch between
@property (nonatomic, copy) NSArray *allViewControllers;

// Currently selected view controller
@property (nonatomic, strong) UIViewController *currentViewController;
@end

@implementation UpdateScoreViewController
// Implement viewDidLoad to do additional setup after loading the view, typically from a nib.
- (void)viewDidLoad {
    [super viewDidLoad];

    // Create the score view controller
    ViewControllerA *vcA = [self.storyboard instantiateViewControllerWithIdentifier:@"ViewControllerA"];

    // Create the penalty view controller
    ViewControllerB *vcB = [self.storyboard instantiateViewControllerWithIdentifier:@"ViewControllerB"];

    // Add A and B view controllers to the array
    self.allViewControllers = [[NSArray alloc] initWithObjects:vcA, vcB, nil];

    // Ensure a view controller is loaded
    self.switchViewControllers.selectedSegmentIndex = 0;
    [self cycleFromViewController:self.currentViewController toViewController:[self.allViewControllers objectAtIndex:self.switchViewControllers.selectedSegmentIndex]];
}

#pragma mark - View controller switching and saving

- (void)cycleFromViewController:(UIViewController*)oldVC toViewController:(UIViewController*)newVC {

    // Do nothing if we are attempting to swap to the same view controller
    if (newVC == oldVC) return;

    // Check the newVC is non-nil otherwise expect a crash: NSInvalidArgumentException
    if (newVC) {

        // Set the new view controller frame (in this case to be the size of the available screen bounds)
        // Calulate any other frame animations here (e.g. for the oldVC)
        newVC.view.frame = CGRectMake(CGRectGetMinX(self.view.bounds), CGRectGetMinY(self.view.bounds), CGRectGetWidth(self.view.bounds), CGRectGetHeight(self.view.bounds));

        // Check the oldVC is non-nil otherwise expect a crash: NSInvalidArgumentException
        if (oldVC) {

            // Start both the view controller transitions
            [oldVC willMoveToParentViewController:nil];
            [self addChildViewController:newVC];

            // Swap the view controllers
            // No frame animations in this code but these would go in the animations block
            [self transitionFromViewController:oldVC
                              toViewController:newVC
                                      duration:0.25
                                       options:UIViewAnimationOptionLayoutSubviews
                                    animations:^{}
                                    completion:^(BOOL finished) {
                                        // Finish both the view controller transitions
                                        [oldVC removeFromParentViewController];
                                        [newVC didMoveToParentViewController:self];
                                        // Store a reference to the current controller
                                        self.currentViewController = newVC;
                                    }];

        } else {

            // Otherwise we are adding a view controller for the first time
            // Start the view controller transition
            [self addChildViewController:newVC];

            // Add the new view controller view to the ciew hierarchy
            [self.view addSubview:newVC.view];

            // End the view controller transition
            [newVC didMoveToParentViewController:self];

            // Store a reference to the current controller
            self.currentViewController = newVC;
        }
    }
}

- (IBAction)indexDidChangeForSegmentedControl:(UISegmentedControl *)sender {

    NSUInteger index = sender.selectedSegmentIndex;

    if (UISegmentedControlNoSegment != index) {
        UIViewController *incomingViewController = [self.allViewControllers objectAtIndex:index];
        [self cycleFromViewController:self.currentViewController toViewController:incomingViewController];
    }

}
@end

原始示例(iOS 4 或更早版本):

// Implement viewDidLoad to do additional setup after loading the view, typically from a nib.
- (void)viewDidLoad {
    [super viewDidLoad];

    // Create the score view controller
    AddHandScoreViewController *score = [self.storyboard instantiateViewControllerWithIdentifier:@"AddHandScore"];

    // Create the penalty view controller
    AddHandPenaltyViewController *penalty = [self.storyboard instantiateViewControllerWithIdentifier:@"AddHandPenalty"];

    // Add Score and Penalty view controllers to the array
    self.allViewControllers = [[NSArray alloc] initWithObjects:score, penalty, nil];

    // Ensure the Score controller is loaded
    self.switchViewControllers.selectedSegmentIndex = 0;
    [self switchToController:[self.allViewControllers objectAtIndex:self.switchViewControllers.selectedSegmentIndex]];
}

#pragma mark - View controller switching and saving

- (void)switchToController:(UIViewController *)newVC
{
    if (newVC) {
        // Do nothing if we are in the same controller
        if (newVC == self.currentViewController) return;

        // Remove the current controller if we are loaded and shown
        if([self.currentViewController isViewLoaded]) [self.currentViewController.view removeFromSuperview];

        // Resize the new view controller
        newVC.view.frame = CGRectMake(CGRectGetMinX(self.view.bounds), CGRectGetMinY(self.view.bounds), CGRectGetWidth(self.view.bounds), CGRectGetHeight(self.view.bounds));

        // Add the new controller
        [self.view addSubview:newVC.view];

        // Store a reference to the current controller
        self.currentViewController = newVC;
    }
}

- (IBAction)indexDidChangeForSegmentedControl:(UISegmentedControl *)sender {

    NSUInteger index = sender.selectedSegmentIndex;

    if (UISegmentedControlNoSegment != index) {
        UIViewController *incomingViewController = [self.allViewControllers objectAtIndex:index];
        [self switchToController:incomingViewController];
    }

}

关于ios - 分段控制更改时更改 View Controller ,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/11422845/

有关ios - 分段控制更改时更改 View Controller的更多相关文章

  1. ruby-on-rails - Ruby on Rails 迁移,将表更改为 MyISAM - 2

    如何正确创建Rails迁移,以便将表更改为MySQL中的MyISAM?目前是InnoDB。运行原始执行语句会更改表,但它不会更新db/schema.rb,因此当在测试环境中重新创建表时,它会返回到InnoDB并且我的全文搜索失败。我如何着手更改/添加迁移,以便将现有表修改为MyISAM并更新schema.rb,以便我的数据库和相应的测试数据库得到相应更新? 最佳答案 我没有找到执行此操作的好方法。您可以像有人建议的那样更改您的schema.rb,然后运行:rakedb:schema:load,但是,这将覆盖您的数据。我的做法是(假设

  2. Ruby Readline 在向上箭头上使控制台崩溃 - 2

    当我在Rails控制台中按向上或向左箭头时,出现此错误:irb(main):001:0>/Users/me/.rvm/gems/ruby-2.0.0-p247/gems/rb-readline-0.4.2/lib/rbreadline.rb:4269:in`blockin_rl_dispatch_subseq':invalidbytesequenceinUTF-8(ArgumentError)我使用rvm来管理我的ruby​​安装。我正在使用=>ruby-2.0.0-p247[x86_64]我使用bundle来管理我的gem,并且我有rb-readline(0.4.2)(人们推荐的最少

  3. ruby-on-rails - 项目升级后 Pow 不会更改 ruby​​ 版本 - 2

    我在我的Rails项目中使用Pow和powifygem。现在我尝试升级我的ruby​​版本(从1.9.3到2.0.0,我使用RVM)当我切换ruby​​版本、安装所有gem依赖项时,我通过运行railss并访问localhost:3000确保该应用程序正常运行以前,我通过使用pow访问http://my_app.dev来浏览我的应用程序。升级后,由于错误Bundler::RubyVersionMismatch:YourRubyversionis1.9.3,butyourGemfilespecified2.0.0,此url不起作用我尝试过的:重新创建pow应用程序重启pow服务器更新战俘

  4. ruby - Capistrano 3 在任务中更改 ssh_options - 2

    我尝试使用不同的ssh_options在同一阶段运行capistranov.3任务。我的production.rb说:set:stage,:productionset:user,'deploy'set:ssh_options,{user:'deploy'}通过此配置,capistrano与用户deploy连接,这对于其余的任务是正确的。但是我需要将它连接到服务器中配置良好的an_other_user以完成一项特定任务。然后我的食谱说:...taskswithoriginaluser...task:my_task_with_an_other_userdoset:user,'an_othe

  5. ruby-on-rails - 带 Spring 锁的 Rails 4 控制台 - 2

    我正在使用Ruby2.1.1和Rails4.1.0.rc1。当执行railsc时,它被锁定了。使用Ctrl-C停止,我得到以下错误日志:~/.rvm/gems/ruby-2.1.1/gems/spring-1.1.2/lib/spring/client/run.rb:47:in`gets':Interruptfrom~/.rvm/gems/ruby-2.1.1/gems/spring-1.1.2/lib/spring/client/run.rb:47:in`verify_server_version'from~/.rvm/gems/ruby-2.1.1/gems/spring-1.1.

  6. ruby-on-rails - openshift 上的 rails 控制台 - 2

    我将我的Rails应用程序部署到OpenShift,它运行良好,但我无法在生产服务器上运行“Rails控制台”。它给了我这个错误。我该如何解决这个问题?我尝试更新ruby​​gems,但它也给出了权限被拒绝的错误,我也无法做到。railsc错误:Warning:You'reusingRubygems1.8.24withSpring.UpgradetoatleastRubygems2.1.0andrun`gempristine--all`forbetterstartupperformance./opt/rh/ruby193/root/usr/share/rubygems/rubygems

  7. ruby - 如何验证 IO.copy_stream 是否成功 - 2

    这里有一个很好的答案解释了如何在Ruby中下载文件而不将其加载到内存中:https://stackoverflow.com/a/29743394/4852737require'open-uri'download=open('http://example.com/image.png')IO.copy_stream(download,'~/image.png')我如何验证下载文件的IO.copy_stream调用是否真的成功——这意味着下载的文件与我打算下载的文件完全相同,而不是下载一半的损坏文件?documentation说IO.copy_stream返回它复制的字节数,但是当我还没有下

  8. Ruby 文件 IO 定界符? - 2

    我正在尝试解析一个文本文件,该文件每行包含可变数量的单词和数字,如下所示:foo4.500bar3.001.33foobar如何读取由空格而不是换行符分隔的文件?有什么方法可以设置File("file.txt").foreach方法以使用空格而不是换行符作为分隔符? 最佳答案 接受的答案将slurp文件,这可能是大文本文件的问题。更好的解决方案是IO.foreach.它是惯用的,将按字符流式传输文件:File.foreach(filename,""){|string|putsstring}包含“thisisanexample”结果的

  9. ruby - 更改 ActiveRecord 中对象的类 - 2

    假设我有一个FireNinja我的数据库中的对象,使用单表继承存储。后来才知道他真的是WaterNinja.将他更改为不同的子类的最干净的方法是什么?更好的是,我很想创建一个新的WaterNinja对象并替换旧的FireNinja在数据库中,保留ID。编辑我知道如何创建新的WaterNinja来self现有FireNinja的对象,我也知道我可以删除旧的并保存新的。我想做的是改变现有项目的类别。我是通过创建一个新对象并执行一些ActiveRecord魔法来替换行,还是通过对对象本身做一些疯狂的事情,或者甚至通过删除它并使用相同的ID重新插入来做到这一点,这是问题的一部分。

  10. python - 如何读取 MIDI 文件、更改其乐器并将其写回? - 2

    我想解析一个已经存在的.mid文件,改变它的乐器,例如从“acousticgrandpiano”到“violin”,然后将它保存回去或作为另一个.mid文件。根据我在文档中看到的内容,该乐器通过program_change或patch_change指令进行了更改,但我找不到任何在已经存在的MIDI文件中执行此操作的库.他们似乎都只支持从头开始创建的MIDI文件。 最佳答案 MIDIpackage会为您完成此操作,但具体方法取决于midi文件的原始内容。一个MIDI文件由一个或多个音轨组成,每个音轨是十六个channel中任何一个上的

随机推荐