草庐IT

linux - 无法在 Ubuntu 16.04 中启动 Docker 服务

coder 2023-04-29 原文

我一直在尝试在 Ubuntu 16.04 上使用 Docker (1.10)，但安装失败，因为 Docker 服务没有启动。 我已经尝试通过 docker.io、docker-engine apt 包和 curl -sSL https://get.docker.com/安装 docker | | sh 但它不起作用。

我的主机信息是:

Linux Xenial 4.5.3-040503-generic#201605041831 SMP 2016 年 5 月 4 日星期三 22:33:50 UTC x86_64 x86_64 x86_64 GNU/Linux

这里是systemctl status docker.service:

● docker.service - Docker Application Container Engine
   Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since sáb 2016-05-14 15:17:31 CEST; 12min ago
     Docs: https://docs.docker.com
  Process: 22479 ExecStart=/usr/bin/docker daemon -H fd:// (code=exited, status=1/FAILURE)
 Main PID: 22479 (code=exited, status=1/FAILURE)

may 14 15:17:30 Xenial docker[22479]: time="2016-05-14T15:17:30.103601523+02:00" level=info msg="New containerd process, pid: 22485\n"
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31.149064723+02:00" level=error msg="devmapper: Unable to delete device: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool"
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31.149127439+02:00" level=warning msg="devmapper: Usage of loopback devices is strongly discouraged for production use. Please use `--storage-opt dm.thinpooldev` or use `man docker` to refer to dm.thinpooldev section."
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31.153010028+02:00" level=error msg="[graphdriver] prior storage driver \"devicemapper\" failed: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool"
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31.153130839+02:00" level=fatal msg="Error starting daemon: error initializing graphdriver: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool"
may 14 15:17:31 Xenial systemd[1]: docker.service: Main process exited, code=exited, status=1/FAILURE
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31+02:00" level=info msg="stopping containerd after receiving terminated"
may 14 15:17:31 Xenial systemd[1]: Failed to start Docker Application Container Engine.
may 14 15:17:31 Xenial systemd[1]: docker.service: Unit entered failed state.
may 14 15:17:31 Xenial systemd[1]: docker.service: Failed with result 'exit-code'.

这里是 sudo docker daemon -D

DEBU[0000] docker group found. gid: 999                 
DEBU[0000] Listener created for HTTP on unix (/var/run/docker.sock) 
INFO[0000] previous instance of containerd still alive (23050) 
DEBU[0000] containerd connection state change: CONNECTING 
DEBU[0000] Using default logging driver json-file       
DEBU[0000] Golang's threads limit set to 55980          
DEBU[0000] received past containerd event: &types.Event{Type:"live", Id:"", Status:0x0, Pid:"", Timestamp:0x57372cae} 
DEBU[0000] containerd connection state change: READY    
DEBU[0000] devicemapper: driver version is 4.34.0       
DEBU[0000] devmapper: Generated prefix: docker-8:6-2101297 
DEBU[0000] devmapper: Checking for existence of the pool docker-8:6-2101297-pool 
DEBU[0000] devmapper: poolDataMajMin=7:0 poolMetaMajMin=7:1

DEBU[0000] devmapper: Major:Minor for device: /dev/loop0 is:7:0 
DEBU[0000] devmapper: Major:Minor for device: /dev/loop1 is:7:1 
DEBU[0000] devmapper: loadDeviceFilesOnStart()          
DEBU[0000] devmapper: Skipping file /var/lib/docker/devicemapper/metadata/transaction-metadata 
DEBU[0000] devmapper: loadDeviceFilesOnStart() END      
DEBU[0000] devmapper: constructDeviceIDMap()            
DEBU[0000] devmapper: constructDeviceIDMap() END        
DEBU[0000] devmapper: Rolling back open transaction: TransactionID=1 hash= device_id=1 
ERRO[0000] devmapper: Unable to delete device: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool 
WARN[0000] devmapper: Usage of loopback devices is strongly discouraged for production use. Please use `--storage-opt dm.thinpooldev` or use `man docker` to refer to dm.thinpooldev section. 
DEBU[0000] devmapper: Initializing base device-mapper thin volume 
DEBU[0000] devicemapper: CreateDevice(poolName=/dev/mapper/docker-8:6-2101297-pool, deviceID=1) 
DEBU[0000] devmapper: Error creating device: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool 
DEBU[0000] devmapper: Error device setupBaseImage: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool 
ERRO[0000] [graphdriver] prior storage driver "devicemapper" failed: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool 
DEBU[0000] Cleaning up old mountid : start.             
FATA[0000] Error starting daemon: error initializing graphdriver: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool

这里是 ./check-config.sh 输出:

warning: /proc/config.gz does not exist, searching other paths for kernel config ...
info: reading kernel config from /boot/config-4.5.3-040503-generic ...

Generally Necessary:
- cgroup hierarchy: properly mounted [/sys/fs/cgroup]
- apparmor: enabled and tools installed
- CONFIG_NAMESPACES: enabled
- CONFIG_NET_NS: enabled
- CONFIG_PID_NS: enabled
- CONFIG_IPC_NS: enabled
- CONFIG_UTS_NS: enabled
- CONFIG_DEVPTS_MULTIPLE_INSTANCES: enabled
- CONFIG_CGROUPS: enabled
- CONFIG_CGROUP_CPUACCT: enabled
- CONFIG_CGROUP_DEVICE: enabled
- CONFIG_CGROUP_FREEZER: enabled
- CONFIG_CGROUP_SCHED: enabled
- CONFIG_CPUSETS: enabled
- CONFIG_MEMCG: enabled
- CONFIG_KEYS: enabled
- CONFIG_MACVLAN: enabled (as module)
- CONFIG_VETH: enabled (as module)
- CONFIG_BRIDGE: enabled (as module)
- CONFIG_BRIDGE_NETFILTER: enabled (as module)
- CONFIG_NF_NAT_IPV4: enabled (as module)
- CONFIG_IP_NF_FILTER: enabled (as module)
- CONFIG_IP_NF_TARGET_MASQUERADE: enabled (as module)
- CONFIG_NETFILTER_XT_MATCH_ADDRTYPE: enabled (as module)
- CONFIG_NETFILTER_XT_MATCH_CONNTRACK: enabled (as module)
- CONFIG_NF_NAT: enabled (as module)
- CONFIG_NF_NAT_NEEDED: enabled
- CONFIG_POSIX_MQUEUE: enabled

Optional Features:
- CONFIG_USER_NS: enabled
- CONFIG_SECCOMP: enabled
- CONFIG_CGROUP_PIDS: enabled
- CONFIG_MEMCG_KMEM: missing
- CONFIG_MEMCG_SWAP: enabled
- CONFIG_MEMCG_SWAP_ENABLED: missing
    (note that cgroup swap accounting is not enabled in your kernel config, you can enable it by setting boot option "swapaccount=1")
- CONFIG_BLK_CGROUP: enabled
- CONFIG_BLK_DEV_THROTTLING: enabled
- CONFIG_IOSCHED_CFQ: enabled
- CONFIG_CFQ_GROUP_IOSCHED: enabled
- CONFIG_CGROUP_PERF: enabled
- CONFIG_CGROUP_HUGETLB: enabled
- CONFIG_NET_CLS_CGROUP: enabled (as module)
- CONFIG_CGROUP_NET_PRIO: enabled
- CONFIG_CFS_BANDWIDTH: enabled
- CONFIG_FAIR_GROUP_SCHED: enabled
- CONFIG_RT_GROUP_SCHED: missing
- CONFIG_EXT3_FS: missing
- CONFIG_EXT3_FS_XATTR: missing
- CONFIG_EXT3_FS_POSIX_ACL: missing
- CONFIG_EXT3_FS_SECURITY: missing
    (enable these ext3 configs if you are using ext3 as backing filesystem)
- CONFIG_EXT4_FS: enabled
- CONFIG_EXT4_FS_POSIX_ACL: enabled
- CONFIG_EXT4_FS_SECURITY: enabled
- Network Drivers:
  - "overlay":
    - CONFIG_VXLAN: enabled (as module)
- Storage Drivers:
  - "aufs":
    - CONFIG_AUFS_FS: missing
  - "btrfs":
    - CONFIG_BTRFS_FS: enabled (as module)
  - "devicemapper":
    - CONFIG_BLK_DEV_DM: enabled
    - CONFIG_DM_THIN_PROVISIONING: enabled (as module)
  - "overlay":
    - CONFIG_OVERLAY_FS: enabled (as module)
  - "zfs":
    - /dev/zfs: missing
    - zfs command: missing
    - zpool command: missing

如果有人可以帮助我，我将非常感激

最佳答案

更新

似乎在较新版本的 docker 和 Ubuntu 中，docker 的单元文件只是被屏蔽了(指向/dev/null)。
您可以通过在终端中运行以下命令来验证它:

sudo file /lib/systemd/system/docker.service
sudo file /lib/systemd/system/docker.socket

您应该看到单元文件符号链接(symbolic link)到/dev/null。
在这种情况下，您只需按照 S34N 的建议运行:

sudo systemctl unmask docker.service
sudo systemctl unmask docker.socket
sudo systemctl start docker.service
sudo systemctl status docker

我也会保留原来的帖子，它回答了错误日志，指出应该更换存储驱动程序:

原帖

我遇到了同样的问题，我尝试用 Salva Cort 的建议修复它，但是打印 /etc/default/docker 说:

# THIS FILE DOES NOT APPLY TO SYSTEMD

所以这是一个永久修复 that works for systemd (Ubuntu 15.04 及更高版本):

  1. 新建一个文件/etc/systemd/system/docker.service.d/overlay.conf，内容如下:

    [Service]
ExecStart=
ExecStart=/usr/bin/docker daemon -H fd:// -s overlay

  2. 通过执行刷新更改:

    sudo systemctl daemon-reload

  3. 验证配置是否已加载:

    systemctl show --property=ExecStart docker

  4. 重启docker:

    sudo systemctl restart docker

关于linux - 无法在 Ubuntu 16.04 中启动 Docker 服务，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/37227349/

UbuntuDockerenabledCONFIGlinuxvirtualizationsystemctl

有关linux - 无法在 Ubuntu 16.04 中启动 Docker 服务的更多相关文章

  1. ruby - 使用 ruby​​ 和 savon 的 SOAP 服务 - 2

    我正在尝试使用ruby​​和Savon来使用网络服务。测试服务为http://www.webservicex.net/WS/WSDetails.aspx?WSID=9&CATID=2require'rubygems'require'savon'client=Savon::Client.new"http://www.webservicex.net/stockquote.asmx?WSDL"client.get_quotedo|soap|soap.body={:symbol=>"AAPL"}end返回SOAP异常。检查soap信封，在我看来soap请求没有正确的命名空间。任何人都可以建议我

  2. ruby-on-rails - 由于 "wkhtmltopdf"，PDFKIT 显然无法正常工作 - 2

    我在从html页面生成PDF时遇到问题。我正在使用PDFkit。在安装它的过程中，我注意到我需要wkhtmltopdf。所以我也安装了它。我做了PDFkit的文档所说的一切......现在我在尝试加载PDF时遇到了这个错误。这里是错误:commandfailed:"/usr/local/bin/wkhtmltopdf""--margin-right""0.75in""--page-size""Letter""--margin-top""0.75in""--margin-bottom""0.75in""--encoding""UTF-8""--margin-left""0.75in""-

  3. ruby - 具有身份验证的私有(private) Ruby Gem 服务器 - 2

    我想安装一个带有一些身份验证的私有(private)Rubygem服务器。我希望能够使用公共(public)Ubuntu服务器托管内部gem。我读到了http://docs.rubygems.org/read/chapter/18.但是那个没有身份验证-如我所见。然后我读到了https://github.com/cwninja/geminabox.但是当我使用基本身份验证(他们在他们的Wiki中有)时，它会提示从我的服务器获取源。所以。如何制作带有身份验证的私有(private)Rubygem服务器？这是不可能的吗？谢谢。编辑:Geminabox问题。我尝试“捆绑”以安装新的gem..

  4. ruby-on-rails - 无法使用 Rails 3.2 创建插件？ - 2

    我对最新版本的Rails有疑问。我创建了一个新应用程序(railsnewMyProject)，但我没有脚本/生成，只有脚本/rails，当我输入ruby./script/railsgeneratepluginmy_plugin"Couldnotfindgeneratorplugin.".你知道如何生成插件模板吗？没有这个命令可以创建插件吗？PS:我正在使用Rails3.2.1和ruby​​1.8.7[universal-darwin11.0] 最佳答案 随着Rails3.2.0的发布，插件生成器已经被移除。查看变更日志here.现在

  5. ruby - 无法运行 Rails 2.x 应用程序 - 2

    我尝试运行2.x应用程序。我使用rvm并为此应用程序设置其他版本的ruby​​:$rvmuseree-1.8.7-head我尝试运行服务器，然后出现很多错误:$script/serverNOTE:Gem.source_indexisdeprecated,useSpecification.Itwillberemovedonorafter2011-11-01.Gem.source_indexcalledfrom/Users/serg/rails_projects_terminal/work_proj/spohelp/config/../vendor/rails/railties/lib/r

  6. ruby-on-rails - 无法在centos上安装therubyracer(V8和GCC出错) - 2

    我正在尝试在我的centos服务器上安装therubyracer，但遇到了麻烦。$geminstalltherubyracerBuildingnativeextensions.Thiscouldtakeawhile...ERROR:Errorinstallingtherubyracer:ERROR:Failedtobuildgemnativeextension./usr/local/rvm/rubies/ruby-1.9.3-p125/bin/rubyextconf.rbcheckingformain()in-lpthread...yescheckingforv8.h...no***e

  7. ruby - 无法让 RSpec 工作—— 'require' : cannot load such file - 2

    我花了三天的时间用头撞墙，试图弄清楚为什么简单的“rake”不能通过我的规范文件。如果您遇到这种情况:任何文件夹路径中都不要有空格!。严重地。事实上，从现在开始，您命名的任何内容都没有空格。这是我的控制台输出:(在/Users/*****/Desktop/LearningRuby/learn_ruby)$rake/Users/*******/Desktop/LearningRuby/learn_ruby/00_hello/hello_spec.rb:116:in`require':cannotloadsuchfile--hello(LoadError) 最佳

  8. ruby-on-rails - 启动 Rails 服务器时 ImageMagick 的警告 - 2

    最近，当我启动我的Rails服务器时，我收到了一长串警告。虽然它不影响我的应用程序，但我想知道如何解决这些警告。我的估计是imagemagick以某种方式被调用了两次？当我在警告前后检查我的git日志时。我想知道如何解决这个问题。-bcrypt-ruby(3.1.2)-better_errors(1.0.1)+bcrypt(3.1.7)+bcrypt-ruby(3.1.5)-bcrypt(>=3.1.3)+better_errors(1.1.0)bcrypt和imagemagick有关系吗？/Users/rbchris/.rbenv/versions/2.0.0-p247/lib/ru

  9. ruby-on-rails - s3_direct_upload 在生产服务器中不工作 - 2

    在Rails4.0.2中，我使用s3_direct_upload和aws-sdkgems直接为s3存储桶上传文件。在开发环境中它工作正常，但在生产环境中它会抛出如下错误，ActionView::Template::Error(noimplicitconversionofnilintoString)在View中，create_cv_url,:id=>"s3_uploader",:key=>"cv_uploads/{unique_id}/${filename}",:key_starts_with=>"cv_uploads/",:callback_param=>"cv[direct_uplo

  10. ruby - 无法覆盖 irb 中的 to_s - 2

    我在pry中定义了一个函数:to_s，但我无法调用它。这个方法去哪里了，怎么调用？pry(main)>defto_spry(main)*'hello'pry(main)*endpry(main)>to_s=>"main"我的ruby版本是2.1.2看了一些答案和搜索后，我认为我得到了正确的答案:这个方法用在什么地方？在irb或pry中定义方法时，会转到Object.instance_methods[1]pry(main)>defto_s[1]pry(main)*'hello'[1]pry(main)*end=>:to_s[2]pry(main)>defhello[2]pry(main)

随机推荐