我偶然发现了一个问题，但找不到解决方案。

所以我想做的是在 qt 中解压缩数据，使用 qUncompress(QByteArray)，以 gzip 格式从 www 发送。我使用 wireshark 确定这是有效的 gzip 流，也使用 zip/rar 进行了测试，两者都可以解压缩。

到目前为止的代码是这样的:

    static const char dat[40] = {
         0x1f, 0x8b, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xaa, 0x2e, 0x2e, 0x49, 0x2c, 0x29,
         0x2d, 0xb6, 0x4a, 0x4b, 0xcc, 0x29, 0x4e, 0xad, 0x05, 0x00, 0x00, 0x00, 0xff, 0xff, 0x03, 0x00,
         0x2a, 0x63, 0x18, 0xc5, 0x0e, 0x00, 0x00, 0x00
    };
//this data contains string: {status:false}, in gzip format
QByteArray data;
           data.append( dat, sizeof(dat) );

unsigned int size = 14; //expected uncompresed size, reconstruct it BigEndianes

//prepand expected uncompressed size, last 4 byte in dat 0x0e = 14
QByteArray dataPlusSize;

dataPlusSize.append( (unsigned int)((size >> 24) & 0xFF));
dataPlusSize.append( (unsigned int)((size >> 16) & 0xFF));
dataPlusSize.append( (unsigned int)((size >> 8) & 0xFF));
dataPlusSize.append( (unsigned int)((size >> 0) & 0xFF));

QByteArray uncomp = qUncompress( dataPlusSize );
qDebug() << uncomp;

解压失败并显示:qUncompress: Z_DATA_ERROR: Input data is corrupted.

AFAIK gzip 由 10 字节的 header 、DEFLATE peyload、12 字节的尾部组成(8 字节 CRC32 + 4 字节 ISIZE - 未压缩的数据大小)。 strip 化标题和尾部应该给我留下 DEFLATE 数据流，qUncompress 产生相同的错误。

我检查了用 PHP 压缩的数据字符串，如下所示:

$stringData = gzcompress( "{status:false}", 1);

和 qUncompress 解压缩该数据。(虽然我没有看到和 gzip header ，即 ID1 = 0x1f，ID2 = 0x8b) 我用调试检查了上面的代码，错误发生在:

        if (
        #endif
            ((BITS(8) << 8) + (hold >> 8)) % 31) { //here is error, WHY? long unsigned int hold = 35615
            strm->msg = (char *)"incorrect header check";
            state->mode = BAD;
            break;
        } 

inflate.c 第 610 行。

我知道 qUncompress 只是 zlib 的包装器，所以我想它应该可以毫无问题地处理 gzip。欢迎任何评论。

最好的问候

最佳答案

这是我的贡献...我开发了一个类 (QCompressor)，基于 zlib 用于轻松压缩/解压缩 QByteArray使用 GZIP。

qcompressor.h:

#ifndef QCOMPRESSOR_H
#define QCOMPRESSOR_H

#include <zlib.h>
#include <QByteArray>

#define GZIP_WINDOWS_BIT 15 + 16
#define GZIP_CHUNK_SIZE 32 * 1024

class QCompressor
{
public:
    static bool gzipCompress(QByteArray input, QByteArray &output, int level = -1);
    static bool gzipDecompress(QByteArray input, QByteArray &output);
};

#endif // QCOMPRESSOR_H

qcompressor.cpp:

#include "qcompressor.h"

/**
 * @brief Compresses the given buffer using the standard GZIP algorithm
 * @param input The buffer to be compressed
 * @param output The result of the compression
 * @param level The compression level to be used (@c 0 = no compression, @c 9 = max, @c -1 = default)
 * @return @c true if the compression was successful, @c false otherwise
 */
bool QCompressor::gzipCompress(QByteArray input, QByteArray &output, int level)
{
    // Prepare output
    output.clear();

    // Is there something to do?
    if(input.length())
    {
        // Declare vars
        int flush = 0;

        // Prepare deflater status
        z_stream strm;
        strm.zalloc = Z_NULL;
        strm.zfree = Z_NULL;
        strm.opaque = Z_NULL;
        strm.avail_in = 0;
        strm.next_in = Z_NULL;

        // Initialize deflater
        int ret = deflateInit2(&strm, qMax(-1, qMin(9, level)), Z_DEFLATED, GZIP_WINDOWS_BIT, 8, Z_DEFAULT_STRATEGY);

        if (ret != Z_OK)
            return(false);

        // Prepare output
        output.clear();

        // Extract pointer to input data
        char *input_data = input.data();
        int input_data_left = input.length();

        // Compress data until available
        do {
            // Determine current chunk size
            int chunk_size = qMin(GZIP_CHUNK_SIZE, input_data_left);

            // Set deflater references
            strm.next_in = (unsigned char*)input_data;
            strm.avail_in = chunk_size;

            // Update interval variables
            input_data += chunk_size;
            input_data_left -= chunk_size;

            // Determine if it is the last chunk
            flush = (input_data_left <= 0 ? Z_FINISH : Z_NO_FLUSH);

            // Deflate chunk and cumulate output
            do {

                // Declare vars
                char out[GZIP_CHUNK_SIZE];

                // Set deflater references
                strm.next_out = (unsigned char*)out;
                strm.avail_out = GZIP_CHUNK_SIZE;

                // Try to deflate chunk
                ret = deflate(&strm, flush);

                // Check errors
                if(ret == Z_STREAM_ERROR)
                {
                    // Clean-up
                    deflateEnd(&strm);

                    // Return
                    return(false);
                }

                // Determine compressed size
                int have = (GZIP_CHUNK_SIZE - strm.avail_out);

                // Cumulate result
                if(have > 0)
                    output.append((char*)out, have);

            } while (strm.avail_out == 0);

        } while (flush != Z_FINISH);

        // Clean-up
        (void)deflateEnd(&strm);

        // Return
        return(ret == Z_STREAM_END);
    }
    else
        return(true);
}

/**
 * @brief Decompresses the given buffer using the standard GZIP algorithm
 * @param input The buffer to be decompressed
 * @param output The result of the decompression
 * @return @c true if the decompression was successfull, @c false otherwise
 */
bool QCompressor::gzipDecompress(QByteArray input, QByteArray &output)
{
    // Prepare output
    output.clear();

    // Is there something to do?
    if(input.length() > 0)
    {
        // Prepare inflater status
        z_stream strm;
        strm.zalloc = Z_NULL;
        strm.zfree = Z_NULL;
        strm.opaque = Z_NULL;
        strm.avail_in = 0;
        strm.next_in = Z_NULL;

        // Initialize inflater
        int ret = inflateInit2(&strm, GZIP_WINDOWS_BIT);

        if (ret != Z_OK)
            return(false);

        // Extract pointer to input data
        char *input_data = input.data();
        int input_data_left = input.length();

        // Decompress data until available
        do {
            // Determine current chunk size
            int chunk_size = qMin(GZIP_CHUNK_SIZE, input_data_left);

            // Check for termination
            if(chunk_size <= 0)
                break;

            // Set inflater references
            strm.next_in = (unsigned char*)input_data;
            strm.avail_in = chunk_size;

            // Update interval variables
            input_data += chunk_size;
            input_data_left -= chunk_size;

            // Inflate chunk and cumulate output
            do {

                // Declare vars
                char out[GZIP_CHUNK_SIZE];

                // Set inflater references
                strm.next_out = (unsigned char*)out;
                strm.avail_out = GZIP_CHUNK_SIZE;

                // Try to inflate chunk
                ret = inflate(&strm, Z_NO_FLUSH);

                switch (ret) {
                case Z_NEED_DICT:
                    ret = Z_DATA_ERROR;
                case Z_DATA_ERROR:
                case Z_MEM_ERROR:
                case Z_STREAM_ERROR:
                    // Clean-up
                    inflateEnd(&strm);

                    // Return
                    return(false);
                }

                // Determine decompressed size
                int have = (GZIP_CHUNK_SIZE - strm.avail_out);

                // Cumulate result
                if(have > 0)
                    output.append((char*)out, have);

            } while (strm.avail_out == 0);

        } while (ret != Z_STREAM_END);

        // Clean-up
        inflateEnd(&strm);

        // Return
        return (ret == Z_STREAM_END);
    }
    else
        return(true);
}

这里是我的测试程序的 main():

#include <QDebug>
#include "qcompressor.h"

int main(int argc, char *argv[])
{
    Q_UNUSED(argc);
    Q_UNUSED(argv);

    QString initialPlainText = "This is a test program for verifying that the QCompressor class works fine!";

    qDebug() << "Initial plain text is: " << initialPlainText;

    QByteArray compressed;

    if(QCompressor::gzipCompress(initialPlainText.toLatin1(), compressed))
    {
        qDebug() << "Compressed text length is:" << compressed.length();

        QByteArray decompressed;

        if(QCompressor::gzipDecompress(compressed, decompressed))
        {
            qDebug() << "Decompressed text is: " << QString::fromLatin1(decompressed);
        }
        else
            qDebug() << "Can't decompress";
    }
    else
        qDebug() << "Can't compress";
}

为了让它工作，您需要添加一行 LIBS += -lz 到您的 .pro 文件以针对 zlib 进行链接。

关于c++ - Qt quncompress gzip 数据，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/2690328/